EN-4
15. Tuning control
16. FUNCTION switch– to select signal source
17. BAND switch– to select bandwidth (FM or AM)
18. LED PROGRAM – indicates programming/playing of CD songs in order programmed by the user
19. PROGRAM button – to program songs from CD in order desired by the user
20. REPEAT button– to select the desired repeat playback mode
21. LED REPEAT – indicates currently used mode of repeat playback
22. Tlaþítko B.SKIP – to skip to the beginning of currently or previously played songs from CD
23. LED display – to inform the user about current funtion/ setting of the device
24. CD tray
25. F.SKIP button – to skip to the beginning of following songs from CD
26. Tone arm
27. Lever for lifting the tone arm
28. Switch to set speed of the turntable
29. Tone arm holder
30. PLAY/PAUSE button (USB/SD) – to start /pause playback from a USB device connected to USB port or SD memory card inserted into a slot
31. SKIP + – button to skip to the beginning of following songs on the USB/SD
32. SKIP – button – to skip to the beginning of currently/ previously played songs from the USB/SD
33. USB/SD button – to select media for playback
34. Slot for SD memory card
35. USB connector – to connect USB to the device
36. Green LED ACC – ß ashes during playback of recording from external USB device or from SD memory card
37. LED ERR – lights up when you try to play from USB device or SD memory card without them being inserted or connected to the device
38. OPEN/CLOSE button – to open/close CD tray
39. PLAY/PAUSE button – to start /pause CD playback
40. LED PLAY – indicates CD playback
41. STOP button – to stop CD playback
Assembling the record player
• Remove the unit from the shipping carton.
• Remove the packaging material from the device and store it out of the reach of children until its disposal.
• Move the record player to the place of its installation.
• Open the turntable cover and remove all the plastic moldings used to secure the parts of the turntable against their movement during transport and
storage.
• Remove the cover of the tip of the cartridge insert.
• Extend the FM wire antenna. After making the device operational, search for a place for the antenna, which will allow optimum reception of the desired FM
stations.
• Insert the cable to connect the speaker through the horn holder according to Þ gure 1.
• Turn the horn and its holder according to Þ gure 2.
• Connect the speaker cable – see Þ gure 3.
• Fasten the horn to the device – see Þ gure 4 and secure it by tightening the horn lock – see Þ gure 5.
Power supply
The included AC adapter is used to supply the device with power.
• Unwind the AC adapter’s cable.
• Insert the adapter into the power outlet.
• Connect the AC adapter cable to the AC adapter jack on the rear of the device.
Sencor STT 018TUBE 7j.indb 4 8.4.2012 19:07:27
