758518
10
Zoom out
Zoom in
Previous page
1/22
Next page
EN-10
EN
Food Processor
STM 40WH / STM 41GR / STM 42BL / STM 43OR
STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS
2014
11/2014
GRINDING MEAT, MAKING SAUSAGES AND KEBABS
ASSEMBLING AND DISASSEMBLING THE MEAT GRINDER
1. Insert the screw shaft B5 into the grinding chamber B4 with the cogged wheel entering fi rst.
2. Place the grinding blade B6 on to the shaft B5 (with the edge facing outwards from the chamber)
and attach either the fi ne or coarse grinding plate B8 or B9 depending on the preferred coarseness
of the grind. Make sure that the notch in the grinding chamber B4 slides into the groove on the
grinding plate.
Attention:
When attaching the blade B6, be very careful not to injure yourself on the sharp edge.
3. Place the screw cap B7 on to the grinding chamber B4 and tighten it securely by screwing it
clockwise.
4. Check that the appliance is turned off and disconnected from the el. power socket. The arm A8
must be tilted down to a horizontal position and the attachment A1, A2 or A3 must be removed.
Remove the cover A7 from the multi-function head. Push the assembled meat grinder at an angle
of 45° against the attachment hub that is located on the front part of the multi-function head and
secure it in place by turning it anticlockwise (fi g. D). The meat grinder is secured in the vertical
position when the push button A6 slides out together with an audible click. Place the stainless
steel hopper B2 on to the feed tube B3. The meat grinder is now assembled and ready for use.
D
45°
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STM 43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 43 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info