Manual Sencor STM 43 (page 20 of 22) (English)

758518

Zoom out

Zoom in

1/22

EN-20

Food Processor

STM 40WH / STM 41GR / STM 42BL / STM 43OR

STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS

2014

11/2014

• Set the speed to 2 and gradually add the ﬂ our until everything is properly combined into a single

mass. Do not, however, beat for too long.

• Use a teaspoon to form small balls and lay them out evenly on to a lightly greased or parchment

paper covered baking tray. Leave sufﬁ cient room around each ball. Using a lightly ﬂ oured fork,

push down each of the balls.

• Bake in a preheated oven at 190 °C for approximately 12-15 minutes or until the biscuits are lightly

golden in colour.

• Take the biscuits off the baking tray and leave to cool down on a metal rack.

Cream snow puffs (20–24 pcs)

4 egg whites

1 cup of caster sugar

• Use the whisk A2.

• Set the speed level to 8 and whip up a thick snow from the egg whites. Lower the speed to level 1

and carefully add half the sugar and whip it in. Then add the remaining sugar.

• Using a spoon, apply a small amount of the snowy mixture on to a lightly greased baking tray.

Leave about 3 cm around the individual pieces so that they do not bake to one another.

• Bake in the oven at 120 °C about 1 to 1½ hours or until the snow puffs are dry. To avoid burning

them, do not, however, bake then too long. Take them off the baking tray and put them aside to

cool down and store them in an air-tight container.

Note:

You can use a decorating tool to create larger snow puffs. This may necessitate a longer baking

time.

White bread

4 cups (600 g) of bread ﬂ our

3 tablespoons of dried milk

1½ teaspoons of salt

1½ tablespoons of sugar

1 teaspoon of bread improver

2 teaspoons of instant yeast

2 tablespoons of oil

1½ cups (375 ml) of water

additional bread ﬂ our for hand kneading

• Use the kneading hook A1.

• In the mixing bowl, mix the ﬂ our, dried milk, salt, sugar, bread improver and the instant yeast.

• Set the speed to 1–2 and slowly add water and oil into the dry mix. Leave it to knead until a dough

starts to form.

• Move the dough on to a lightly ﬂ oured rolling board and thoroughly knead by hand until the

dough is sufﬁ ciently ﬁ ne and smooth.

Note:

At this stage, the dough should be very well kneaded so that gluten is formed, which gives the

dough the correct elasticity and helps it to rise.

• Place the dough into a large bowl and cover with plastic wrap. Allow it to rise in a warm place for

about 20 minutes or until the dough doubles in size.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 43 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor STM 43 Manual

Product: