758543

Sencor STM 3621 Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
Food Mixer
STM 3620WH, STM 3621GR, STM 3622BL, STM 3623OR, STM 3624RD
STM 3625VT, STM 3626YL, STM 3627TQ, STM 3628RS
EN
EN-7
2015
07/2015
2.4 If you will not be immediately placing ingredients into the mixing bowl A4, press the PUSH button
A9 and tilt the arm A8 to the horizontal position. When the arm A8 is tilted to the horizontal
position, the PUSH button A9 will slide out accompanied by an audible click.
3. Removing the attachment and mixing bowl
3.1 Release the arm A8 by pressing the PUSH button A9 and tilt it upwards. The arm A8 is locked in
the open position when the PUSH button A9 slides out together with an audible click.
3.2 Hold the attachment and gently push it towards the mixing head A7. Then rotate it clockwise until
it is released from the motor shaft and take it off. Turn the mixing bowl A4 anticlockwise and take
it off the base unit A5. Move the arm A8 back to the horizontal position.
OPERATING THE APPLIANCE
1. Unwind the necessary length of power cord from the compartment Aqs.
2. Release the arm A8 by pressing the PUSH button A9 and tilt it out.
3. Into the bowl A4 that is seated in the base unit A5, place the ingredients.
Attention:
The maximum weight of the ingredients that can be processed in a single batch is 1.6 kg. When
preparing bread dough, do not process more than 600 g of flour at once. When preparing dough
for sweet pastries (fruit cakes, etc.) it is possible to process no more than 450 g of flour at once.
The maximum number of egg whites that can be whisked at once is 8.
4. Press the PUSH button A9 and tilt the arm A8 together with the attached attachment to the
horizontal position.
5. Make sure that the food mixer is correctly assembled and that the speed control knob A0 is set
to position 0 (stand-by mode). Connect the power cord to the el. power socket. Connection to
a working power socket is indicated by the speed control knob A0 being lit.
6. Use the speed control knob A0 to set the required speed level from 1 to 6. First, set a lower speed
to prevent ingredients from being sprayed around. As soon as they are mixed together, increase the
speed to the required level. The speed can be adjusted at any time as required.
The pulse mode is used for increasing the speed to maximum for a short time. To activate the
pulse mode, turn the speed control knob A0 to the PULSE position and to ensure continuous
operation hold it down in this position. As soon as you release the speed control knob A0, it will
automatically return to position 0 (off).
Attention:
If it is necessary to wipe ingredients off the inside of the mixing bowl A4 and the attachment,
first turn off the food mixer by setting the speed control knob A0 to position 0 (stand-by mode)
and then disconnect it from the power socket. Then wipe away the ingredients using a plastic
spatula.
The maximum operating time is 6 minutes. Do not leave the appliance in continuous operation
for longer than indicated above. This is especially true under a heavy load (e.g. when processing
heave, thick doughs). If the appliance is in operation under heavy load, allow it to cool down for
at least 10 minutes before turning it on again. At lower loads, a cooling time of 3 to 5 minutes
is usually sufficient.
7. After you have finished using the appliance, set the speed control knob A0 to position 0 (stand-by
mode) and disconnect the power cord from the power socket.
8. Disassemble the food mixer according to the instructions included in chapter Assembling and
disassembling the appliance. Use a soft plastic spatula to remove mixes from the mixing bowl A4
and the attachment.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STM 3621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 3621 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info