758543

Sencor STM 3621 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
EN-6
EN
Food Mixer
STM 3620WH, STM 3621GR, STM 3622BL, STM 3623OR, STM 3624RD
STM 3625VT, STM 3626YL, STM 3627TQ, STM 3628RS
2015
07/2015
PLANETARY MIXING SYSTEM
• The planetary mixing system is based on the principle of dual rotation of the attachment. The
attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around
its own axis in the opposite direction. This ensures that ingredients inside the bowl are processed
thoroughly and evenly.
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all parts that are intended to come into contact with food (kneading hook A1,
whisk A2, beater A3, the stainless steel mixing bowl A4 and pouring shield A6 using warm
water and a neutral kitchen detergent. Then rinse them with clean water and dry thoroughly with
a fine wiping cloth.
SELECTING ATTACHMENT TYPES
ATTACHMENT TYPE PURPOSE OF USE
Kneading hook A1It is used for kneading and preparing heavy and thick doughs containing
yeast, e.g. bread dough.
Beater A3It is used for mixing medium heavy and lighter doughs not containing yeast,
for mixing sauces, creams, fillings, etc.
Whisk A2It is used for whisking whole eggs or egg whites, whipped cream, light
doughs, foamy creams, etc. Do not use it for mixing heavy and thick doughs.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
• Before you start assembling or disassembling the food mixer, check that it is turned off and
disconnected from the el. power socket.
1. Inserting the mixing bowl
1.1 Place the food mixer on an even, dry surface, for example on a kitchen workbench.
1.2 Release the arm A8 by pressing the PUSH button A9 and tilt it upwards. The arm A8 is locked in
the open position when the PUSH button A9 slides out together with an audible click.
1.3 Place the stainless steel bowl A4 into the hole in the base unit A5 and secure it in place by turning
it clockwise. When the bowl A4 is properly attached, it is not possible to lift it off the base unit
A5.
2. Attaching an attachment (kneading hook, beater or whisk)
2.1 If you decide to use the pouring shield A6, then it is necessary to attach it prior to mounting an
attachment. Carefully seat the pouring shield A6 on to the tilt-out arm and secure it in the locked
position by turning it anticlockwise.
2.2 When attaching an attachment, the arm A8 must be secured in the open position, see point 1.2
in chapter Inserting the mixing bowl. Attach one of the attachments to the T-shaped shaft of
the mixing head A7 so that the shaft fits into the hole on the attachment. Push the attachment
towards the mixing head A7 turn it anticlockwise to secure it to the shaft.
2.3 With one hand, hold the attachment and gently pull it downwards. If it is properly secured to the
shaft, it will not come off.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STM 3621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 3621 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info