758908

Sencor SSM 9300 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
Sandwich Maker with Removable Plates
SSM 9300
EN
EN-7
2011 10/2011
BEFORE FIRST USE
1) Remove the Sandwich Maker from the packing material.
2) Wipe the removable baking plates B1, B2, B3 with a wet cloth or sponge and dry completely
with a paper towel of dry cloth.
3) We recommended you allow the sandwich maker to run empty for 5–7 minutes before fi rst use for
each pair of baking plates, so that any odours present are removed from the plates.
Note:
When fi rst turned on, there may be light smoke emitted. This is due to the heating of internal
components and it will pass in a moment.
REPLACING BAKING PLATES
1) Before replacing the baking plates disconnect the sandwich maker from the el. power supply and
allow it to cool down.
2) REMOVING THE BAKING PLATES:
Move locks C3 towards the handle A3 to release the bottom baking plate and then remove it. In
the same way release and remove the top plate.
3) INSERTING THE BAKING PLATES:
Slide the bottom edge of the baking plate under the left and right hinge C2 and C4. Fold the
plate down and push in towards the casing of the sandwich maker until you hear an audible click.
Now the plate is secured in the correct position by locks C3. In the same way attach the top plate.
Always use plate of the same type.
USING THE SANDWICH MAKER
1) Select a suitable type of plate for the type of food that you wish to prepare and insert it into the
sandwich maker, see chapter Replacing baking plates. Coat the baking plates with a little butter or
cooking oil.
2) Connect the Sandwich Maker to a power supply. Both indicator lights on the top panel will light up.
Red indicator light A1 indicates connection into the electric power supply. Green indicator light
A2 indicates that the baking plates are heating up.
3) Close the Sandwich Maker for more effective pre-heating of the baking plates.
4) Prepare the food you wish to cook before the plates heat up.
5) When the baking plates are heated to the operating temperature, the Green indicator light A2 is
turned off.
Note:
The heating indicator light turns on and off. This shows that the operating temperature of bak-
ing plates is maintained.
Open the Sandwich Maker and place the prepared food on the bottom plate. Using the handle A3
close and press the top baking plate on to the bottom plate. Secure handles A3 with the lock A4.
Note:
If you insert too much food or pieces that are too large into the sandwich maker, then it will
not be possible to close it. In such a case it will be necessary to remove some of the food or to
cut the food into smaller pieces. Do not force the sandwich maker shut, as this may damage it.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSM 9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSM 9300 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info