758907
6
Zoom out
Zoom in
Previous page
1/10
Next page
EN-6
EN
Sandwich Maker
SSM 3100
2011 09/2011
BEFORE FIRST USE
1) Remove the Sandwich Maker from the packing material.
2) Wipe the cooking plates with a wet cloth or sponge and dry completely with a paper towel or dry
cloth.
3) Connect the Sandwich Maker to the power supply and leave it turned on for at least 5–7 minutes
to dissipate any odour.
Note:
When fi rst turned on, there may be light smoke emitted. This is due to the heating of internal
components and it will pass in a moment.
USING THE SANDWICH MAKER
1) Coat the cooking plates 6 with butter or cooking oil.
2) Connect the Sandwich Maker to a power supply. Both indicator lights on the top panel will light
up. Red indicator light 2 indicates connection into the electric power supply. Green indicator light
1 indicates heating of the cooking plates.
3) Close the Sandwich Maker for more effi cient pre-heating of the cooking plates.
4) While the cooking plates are heating up, prepare the sandwich. For one sandwich you will need
two slices of toasting bread and fi lling. Place the fi lling exactly between the slices of bread. Too
much of the fi lling may make it hard to close the Sandwich Maker. In this case it may be necessary
to remove some of the fi lling. Do not use force to close the Sandwich Maker, this may lead to
a damage.
Tip:
Try some of the recipes listed bellow.
5) When the cooking plates are heated to the operating temperature, the Green indicator light 1 is
turned off.
Note:
The heating indicator light turns on and off. This signalizes that the operating temperature of
cooking plates is maintained.
Open the Sandwich Maker and place one or two sandwiches on the bottom plate. Using the handle
3 close and press the top cooking plate to the bottom plate. Secure handles 3 with the lock 4.
6) After 2 to 3 minutes release the lock 4, open the top plate and remove the sandwiches or
continue cooking if necessary. To remove sandwiches use a wooden or heat resistant plastic spatula.
Do not use a fork or knife or anything made of metal. Otherwise the non-stick coating may be
damaged.
Note:
The cooking time depends on the type of bread, fi lling and your taste.
7) Before cooking another sandwich, close the Sandwich Maker and wait until the Green indicator
light 1 is turned off.
8) After you fi nish using the Sandwich Maker, disconnect the power cord from the el. power supply.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSM 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSM 3100 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info