758818

Sencor SSJ 5051 Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
EN-6
EN
Slow Juicer
SSJ 5050SS / SSJ 5051RD
Copyright © 2016, Fast ČR, a.s. 04/2016
THE PRINCIPLE AND ADVANTAGES OF A SLOW JUICER
• This juicer utilises a slow juicing system. In the first phase, the screw shaft coarsely masticates the
inserted ingredients. In the next phase, juice is pressed out and pulp is separated. Juice extracted
using the slow juicing process contains only a minor amount of fibre, oxidises slower and retains
valuable vitamins and enzymes.
• This juicer is suitable for juicing both soft and hard fruits and vegetables such as citrus fruits,
currants, gooseberries and other berries, apples, pears, carrots, beetroot, cucumbers, pineapple,
melon, etc. It can even handle leafy vegetables. However, in this case we recommend to juice
together with other fruits and vegetables.
• The slow juicer is not particularly suitable for juicing purely leafy vegetables, overripe fruits or
floury apples.
BEFORE FIRST USE
1. Remove all packaging materials from the appliance and its accessories.
2. Thoroughly wash all removable parts (pusher A1, feed tube with hopper and lid A2, screw shaft
A3, stainless steel strainer A4, juice collector A6 and the juice and pulp collector A9 and A0)
that come into contact with food in warm water using kitchen detergent. Then rinse all these parts
under clean running water and thoroughly wipe dry with a fine wiping cloth. All removable parts
can also be safely washed in a dishwasher.
Attention:
Never submerge the motor unit Aqd in water or rinse it under running water.
ASSEMBLING THE JUICER
• During assembly, the appliance must be turned off and disconnected from the power socket.
1. Place the base unit Aqd on an even, dry and stable surface. Ensure that the sealing ring A5 is
properly attached to the juice collector A6. Place the juice collector A6 on to the motor unit Aqd
so that both outlets A7 and A8 fit into the groove in the motor unit Aqd and that the motor shaft
fits into the central hole in the juice collector A6.
2. Insert the strainer A4 into the juice collector A6 so that the symbol "•" marked on the top edge
of the strainer A4 is aligned with the same symbol on the top edge of the juice collector A6. This
will align the pulp outlet hole in the bottom part of the strainer A4 with the pulp outlet hole in
the juice collector A6. Push the strainer A4 downwards.
3. Insert the shaft A3 into the strainer A4 and push it downwards so that it is properly seated over
the hexagonal drive shaft on the motor unit Aqd.
4. Place the feed tube with hopper and lid A2 on to the juice collector A6 so that symbol" " on the
lid A2 is aligned with symbol "•" on the juice collector A6. Turn the feed tube A2 clockwise all
the way. This will secure the lid with the feed tube A2 on the juice collector A6.
5. Properly secure the lid A2 using both locking arms Aqa.
6. Insert the pusher A1 into the feed tube A2. Place the pulp container A9 under the pulp outlet
A7 and place the juice jug A0 under the juice spout A8. The juicer is now assembled and ready
for use.
7. The juicer is equipped with a safety mechanism that prevents it from being started unless it is
correctly assembled.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSJ 5051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSJ 5051 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info