759887

Sencor SSI 5420 Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
Steam Iron
SSI 5420RD / SSI 5421TQ
EN
EN-7
2015 06/2015
Note:
During first use, a weak cracking sound caused by the expanding plastic may be heard. This is an
entirely normal event, which will disappear in a short time.
While ironing, the indicator light A2 will intermittently turn on and off. This indicates that the
set temperature is being maintained.
First iron the laundry that requires the lowest temperature. This will save you time because the
soleplate Aqs heats up faster than it cools down.
If you are ironing at a high temperature and then set a lower temperature, wait until the soleplate
cools down.
3. CONTINUOUS STEAM FUNCTION
3.1 Set or turn off the continuous steam output using the continuous steam lever A5.
3.2 If you wish to iron with steam, the water tank Aqa must be filled with water and the temperature
dial A9 must be set in the range from ●●● to MAX, which is suitable only for certain types of textile
materials, see chapter Preparation before ironing. Use the continuous steam lever A5 to select
weaker ● or stronger ●● steam output.
3.3 If the continuous steam function is set at the same time as the temperature dial A9 is set to low ●
or medium temperature ●●, then water may drip from the soleplate Aqs. For this reason, the iron
is equipped with the Drip-Stop system, which automatically stops the steam process when the
temperature dial A9 is not set to a high enough temperature and so prevents potential dripping
from the steam outlets.
Note:
The iron continuously emits steam only if you hold it in a horizontal position. You can stop the
release of steam by standing the iron upright.
3.4 If you wish to iron without the continuous steam function, set the lever A5 to the position marked
by the symbol .
Attention:
Do not use the steam function for silk and synthetics so as not to damage the surface of the fabric.
4. STEAM BOOST FUNCTION
4.1 Press the steam boost button A3 to generate a strong flow of steam which can even out even very
crumpled up textiles.
4.2 Only use the steam boost function when the temperature dial A9 is set in the range ●●● to MAX.
In order to use this function, the water tank Aqa must be filled with water. If the indicator light A2
is lit, wait until it turns off and only then press the steam boost button A3. Wait at least 5 seconds
before pressing the button A3 again.
4.3 The steam boost function can also be used when vertical ironing textiles (e.g. curtains, garments
hanging on coat hangers, etc.).
Attention:
Do not use the steam boost function for silk and synthetics so as not to damage the surface of
the fabric.
5. WATER SPRAY FUNCTION
• The water spray function can be used at any ironing temperature. Make sure that there is water in
the water tank Aqa and to spray textiles using the spray nozzle A7 press the spray button A4.
Note:
We do not recommend using the spraying function on silk and synthetics.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSI 5420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSI 5420 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info