759887
6
Zoom out
Zoom in
Previous page
1/10
Next page
EN-6
EN
Steam Iron
SSI 5420RD / SSI 5421TQ
2015 06/2015
PREPARATION BEFORE IRONING
Sort the laundry according to international symbols shown on the textiles or according to the fabric types.
SYMBOL FABRIC TYPE SETTING THE TEMPERATURE DIAL
Synthetics
(nylon, polyamide, polyester, etc.)
low temperature
Silk – wool ●●
medium temperature
Cotton – linen ●●● to MAX
high temperature
Fabric, that should not be ironed
USING THE STEAM IRON
Check that the iron is disconnected from the power socket.
Wipe the soleplate Aqs with a lightly damp cloth before first use and then wipe dry.
1. FILLING THE WATER TANK
1.1 Prior to filling the water tank Aqa, check that the iron is disconnected from the power socket and
that the temperature dial A9 is set to the MIN position.
1.2 Set the continuous steam control lever A5 to the position marked by the symbol .
1.3 Fill the included container Aqd with water. Use distilled water or tap water (soft to medium water
hardness). If water in your area is hard or very hard (more than 14 °dH / 2,5 mmol/l), we recommend
that you use 1 part of distilled water and 1 part of tap water.
1.4 Place the iron in the upright position. Flip open the filling opening cap on the water tank A6. Use
one hand to hold the handle A1 and tilt the iron so that the soleplate Aqs is at an angle of about
45° relative to the surface on which the iron is located. Then slowly pour the water from the container
Aqd through the filling opening into the water tank Aqa while making sure that the water level
does not exceed the maximum mark on the water tank Aqa.
1.5 Put the iron back into the upright position and close the water tank filling opening cap A6.
2. SETTING THE TEMPERATURE DIAL
2.1 Place the iron upright on an even and stable surface.
2.2 Insert the power cord into an electric power socket.
2.3 Set the temperature dial A9 according to the type of fabric that you wish to iron, see chapter
Preparation before ironing. The indicator light A2 will be lit. This signals that the soleplate Aqs is
heating up. When the soleplate Aqs heats up to the set temperature, the indicator light A2 will
turn off. The iron is now ready for ironing.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSI 5420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSI 5420 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info