■Before setting the vertical tilt angle of the motor unit A3, rst turn o the fan. Set the desired angle of the motor
unit A3 and then you may start the fan again.
Note:
The motor unit A2 may only be tilted up and down in alimited range. Do not set the tilt angle of the
motor unit A2 by force.
Setting the height of the fan
■Turn o the fan before setting its height. Use one hand to rmly hold the bottom part of the extensible pole A8
and use the other hand to release the inner extension lock A9 by turning the locking screw anticlockwise. Slide
the top part of the extensible pole A8 in or out to set the desired fan height. To lock the set height in place, tighten
the locking screw clockwise.
CLEANING AND MAINTENANCE
■Before cleaning it, make sure that the appliance is turned o and disconnected from the power socket.
■Regularly remove dust from the appliance. For normal cleaning, aclean, dry cloth is sucient. In the event that it
is dirtier, disassemble the appliance and then wipe the individual parts with awiping cloth slightly dampened in
asolution of warm water and neutral detergent. Then wipe everything so that it is thoroughly dry. Make sure that
when cleaning, no water leaks into the motor unit A3.
■Do not submerge the appliance or its power cord in water and do not wash it under running water.
■For cleaning do not use steel wool, cleaning products with an abrasive eect, petrol and other solvents.
STORAGE
■If you will not be using the fan for an extended period of time, store it in aclean, dry place or disassemble it and
put it back into the box.
TECHNICAL SPECIFICATIONS
Rated voltage range ...............................................................................................................................................................................220−240 V
Rated frequency ................................................................................................................................................................................................50 Hz
Rated power ..........................................................................................................................................................................................................50 W
Electrical shock protection class ...........................................................................................................................................................................II
Maximum fan ow rate ....................................................................................................................................................................59.90 m
3
/min
Service value ..................................................................................................................................................................................1.37 (m
3
/min)/W
Maximum air velocity .................................................................................................................................................................................3.21 m/s
Measurement standard for service value .............................................................................................IEC 60879:1986, EN 50564:2011,
...........................................................................................................................................EN 60704-2-7:1998, EN 60704-1:2010, +A11: 2012
Contact details for obtaining more information .......................................................................FAST ČR, a. s., Černokostelecká 1621,
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SFN 4040 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SFN 4040 in the language / languages: English as an attachment in your email.
The manual is 0,81 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
