759906
8
Zoom out
Zoom in
Previous page
1/10
Next page
EN-8
EN
Pedestal Fan
SFN 4040SL
2019 12/2019
DESCRIPTION OF THE APPLIANCE
A1 Protective grille (consists of two parts: front and rear)
A2 Fan blades with adiameter of 40 cm
A3 Motor unit
A4 Horizontal oscillation toggle switch
A5 Speed selector 0 - o, 1 - low speed, 2 - medium speed, 3 - high speed
A6 Screw for attaching the motor unit to the pole
A7 Fan head tilt angle adjustment screw
A8 Extensible pole
A9 Pole extension lock
A10 Base
Note:
The accessories include ascrew and anut for joining the protective grills.
BEFORE FIRST USE
■ Take the appliance and its accessories out of the packaging materials. Before disposing of the packaging materials,
make sure that no part of the appliance is missing.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
■ Before assembling or disassembling the appliance, make sure that it is turned o and disconnected from the
power socket.
■ Remove the nut from the underside of the extensible pole A8. Seat the extensible pole A8 on the base A10 so that
the opening of the extensible pole A8 is aligned with the hole in the base A10. Secure the extensible pole A8 in
place using the nut. Check that it is correctly tightened.
■ Remove the four screws A3 from the motor unit. Place the rear part of the protective grille A1 on to the motor unit
A3 so that the holes in the motor unit A3 are aligned with the holes in the protective grille A1. Secure the rear part
of the protective grille A1 using the screws.
■ Place the fan blades A2 on to the shaft of the motor unit A3 and rmly tighten the screws.
■ Now attach the front part of the protective grille A1 and fasten both parts together using the metal clamps and
asmall screw, which is apart of the grille assembly.
■ Place the motor unit A3 with the attached fan head on the extensible pole A8 and secure the fan head using the
screw A6.
■ Before putting the fan into operation, check that it is correctly assembled and that the protective grills are rmly
joined.
■ To disassemble, proceed in reverse sequence.
OPERATING THE APPLIANCE
Setting the speed and turning o the fan
Place the fan on an even, dry and smooth surface within reach of apower socket. Connect the power cord to
apower socket. To set the air ow speed, use the speed selector A5.
0 – turn o the fan;
1– set alow air ow speed;
2 – set amedium air ow speed;
3– set ahigh air ow speed.
When you have nished using the fan, always turn it o and disconnect it from the power socket.
Setting horizontal oscillation
■ The horizontal oscillation of the motor unit A3 can be set using the toggle switch A4. To start the horizontal
oscillation, push the toggle switch A4 down. The motor unit A3 will oscillate from side to side at an angle of
approximately 90°.
■ To turn o the oscillation, pull the toggle switch A4 up. This will turn o the oscillation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFN 4040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFN 4040 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info