Manual Sencor SAC MT7007C (page 13 of 15) (English)

755980

Zoom out

Zoom in

1/15

- 13 - 04/2021

2. Automatic turn-off function

■ While the portable air conditioner is running, press the button C9. Press the

button C9 repeatedly to set the time after which the portable air conditioner will

turn off automatically. You can set the time of the automatic turn-off function in the

range from 1 up to 24 hours.

■ After afew seconds, the set time will be saved in the air conditioner memory and the

automatic turn-off indicator will be lit on the display C5. Once the set time elapses,

the portable air conditioner will turn off automatically.

■ If you press button C9 or button C14 after the automatic turn-off function is

set, the setting will be automatically cancelled.

3. Change of the temperature unit

■ Press and hold +/- buttons simultaneously to change the temperature unit from°C.

to °F and vice versa.

4. Wi-Fi function (valid only for Wi-Fi models)

■ You can also control the portable air conditioner directly from your smart phone

thanks to the “TuyaSmart” application.

■ Install the “TuyaSmart” application on to your smart phone. The application is

available for operating systems iOS (App Store) and Android (Google Play). Further

follow the instructions in the application.

google

App Store

■ In order to control the portable air conditioner using the installed application, it is

necessary the Wi-Fi is turned on.

■ While the portable air conditioner is off (it is in stand-by mode), press the button

C10 six times within four seconds to reset the Wi-Fi signal. An audible alert sounds.

If the function is on, the indicator C2 will be lit.

B. REMOTE CONTROL

Inserting and replacing batteries

■ Slide out the battery compartment cover, which is located on the rear side of the

remote control. Place two AAA/LR03 (2× 1.5 V) alkaline batteries into the battery

compartment and close the cover.

■ When inserting the batteries ensure the correct polarity as shown in the battery

compartment.

■ When replacing the batteries, always use batteries of the same type, never combine

old and new batteries or batteries of various types.

Note:

Removing the batteries from the remote control will delete all the

settings. After new batteries are inserted the default remote control

settings as programmed by the manufacturer will be renewed.

If you do not use the remote control for longer than 2 months, remove

the batteries.

Caution:

Dispose the used batteries according to the local regulations.

Never dispose the batteries together with the household waste.

Do not use old and new batteries at the same time. Do not use

alkaline, standard, and rechargeable batteries at the same time.

Do not throw batteries into fire. They may explode or leak.

Using the remote control

■ For the remote control to work correctly, ensure that the maximum distance of the

remote control from the portable air conditioner is not greater than 7 m and that

there is no obstacle between the remote control and the portable air conditioner

that could prevent the transmission of the signal.

■ Point the remote control directly at the portable air conditioner. The transmission of

the signal is confirmed by ashort sound signal.

■ Do not expose the remote control to direct sunlight or high temperatures.

Otherwise, the signal may not be transmitted.

Turning the portable air conditioner on and off

■ Press the button D1 once to turn the portable air conditioner on. Press it again to

switch the portable air conditioner to the stand-by mode.

OPERATING MODES

1. Cooling mode

■ Repeatedly press the button D2 until the cooling indicator C6 is lit. Use the +/-

buttons to set the desired temperature. You can set the temperature in the range

from 18 to 32°C.

■ Use the button D7 to set the fan speed in the following order: High (high speed)

– Low (low speed). Each time the button is pressed, the respective indicator will be

lit on the control panel A1.

2. Fan mode

■ Repeatedly press the button D2 until the fan indicator C8 is lit. Use the

button D7 to set the fan speed in the following order: High (high speed) – Low (low

speed). Each time the button in pressed, the respective indicator will be lit on the

control panel A1 and at the same time, the respective graphic symbol ( symbol

for high speed; symbol for low speed) will be lit on the display C5. In this mode,

it is not possible to set the temperature, nor it is necessary to connect the flexible

hose B4 to the portable air conditioner.

Note:

In the fan mode, it is not possible to set the temperature.

3. Dehumidification mode

■ Ensure the flexible hose B4 is connected to the air conditioner. Repeatedly press the

button D2 until the dehumidification indicator C7 is lit. The display C5 shows

. In this mode, it is not possible to set the temperature or fan speed. The fan

speed is automatically set.

FUNCTIONS OF THE PORTABLE AIR CONDITIONER

1. SLEEP FUNCTION

■ The sleep function is used to reduce overnight power consumption when aconstant

temperature is not necessary. The function also ensure comfort while sleeping as the

air conditioner operation is turned down and the display illumination is dimmed.

■ Select the operation mode – see the previous part of the manual.

■ Press the button D5. The portable air conditioner will operate in the previously

selected mode.

■ When you choose the sleep function, the display illumination C5 will be dimmed

and the fan will be automatically set to low speed.

■ When the cooling mode was selected, the temperature will increase by 1°C. per

hour in a2-hour period. This new temperature will be maintained for six hours and

then the portable air conditioner will be turned off.

■ The sleep function can be cancelled at any time by pressing the button D5,

button D2 or button D7.

2. AUTOMATIC TURNON AND TURNOFF FUNCTIONS

Automatic turn-on

■ Automatic turn-on function enables to set the time after which the portable air

conditioner will turn on automatically.

■ Turn the portable air conditioner on by pressing the button D1. Use the

button D2 to select the operation mode in which you wish to turn the portable air

conditioner on. Use the +/- buttons to set the desired temperature and use the

button D7 to set the fan speed as required. Press the button D1 to turn off the

portable air conditioner.

■ Press shortly once the button D4. Press the button D4 repeatedly to set the

time after which the portable air conditioner will turn on automatically. You can set

the time of the automatic turn-on function in the range from 1 up to 24 hours.

■ After afew seconds, the set time will be saved in the air conditioner memory and the

automatic turn-on indicator will be lit on the display C5. Once the set time elapses,

the portable air conditioner will turn on automatically.

■ If you press button D4 or button D1 after the automatic turn-on function is

set, the setting will be automatically cancelled.

Automatic turn-off

■ Automatic turn-off function enables to set the time after which the portable air

conditioner will turn off automatically.

■ While the portable air conditioner is running, press once the button D4. Press the

button D4 repeatedly to set the time after which the portable air conditioner will

turn off automatically. You can set the time of the automatic turn-on function in the

range from 1 up to 24 hours.

■ If you press button D4 or button D1 after the automatic turn-on function is

set, the setting will be automatically cancelled.

3. CHANGE OF THE TEMPERATURE UNIT

■ When the portable air conditioner is in stand-by mode, press the button D8 to

change the temperature unit from°C. to °F and vice versa.

FLAP ANGLE ADJUSTMENT

■ The air outlet A2 is provided by movable flaps. If you need to adjust the air flow, you

can adjust it by hand to the desired angle by moving up and down.

■ Be careful while handling the flaps not to damage them. We recommend adjusting

the flap angle before turning the portable air conditioner on.

TIPS FOR CORRECT USE

■ To ensure the correct operation of the portable air conditioner, follow these

recommendations:

- Close all the windows and doors in the room where the portable air conditioner

is used. When installed the portable air conditioner semi-permanently, you can

leave the door slightly open (approx. 1cm) to guarantee correct ventilation.

- Protect the room from the direct sunshine. Close curtains or roller blinds to

ensure economy operation of the air conditioner.

- Do not block the air inlet or air outlet.

- Ensure there is no source of heat on in the room.

- Never use the portable air conditioner in very damp rooms, such as laundries.

- Never use the portable air conditioner outside.

- Ensure the portable air conditioner is located on alevel surface. Install special

travel wheel brakes if needed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SAC MT7007C in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SAC MT7007C Manual

Product: