Manual Sempre 91644 (page 9 of 12) (English)

618229

Zoom out

Zoom in

1/12

SUNRISE ALARM CLOCK MODES

AFTER SALES SUPPORT  service@produktservice.info / www.produktservice.info  00800/52323000

11. Now press the “ “ or “ “ key to set the light intensity of the night light or mood lighting from 0 – 5. (Basic setting is 3)

If you do not want any light, select light intensity “0“.

12. Press the "

" key. Now press the " " or " " key to select the wake-up phase (OFF, 5, 10, 15, 20, 25 or 30 minutes; default

setting is 30 minutes).

5, 10, 15, 20, 25 or 30 minutes before the preset alarm time, the light softly starts to shine and increases its intensity until the

preset alarm time and light intensity is reached. At the preset alarm time the sunrise alarm clock has reached the preset light

intensity. At the preset alarm time, the selected alarm sound also starts very quietly and gets louder and louder until the preset

alarm volume has been reached after 60 seconds.

If “OFF“ is selected, the light will only be activated at the preset alarm time.

13. Press the "

" key

6.4.2 Testing the alarm in fast forward mode

Briefly press the "TEST" key to test the alarm and the settings you selected in fast forward mode (20 seconds). Note: The radio must

not be switched on because with the radio switched on, the "TEST" key functions as selection key for channels 1-8.

During the first 10 seconds of the test, the light increases to the preset intensity. During the next 10 seconds of the test, the alarm

sound increases to the preset volume. Press the "TEST" key if you want to abort the test.

6.4.3 Deactivating the alarm

Hold down the “ " key for approx. 3 seconds to stop the alarm and switch off the light. The alarm remains active, i.e. on the next

day, it starts at the same time. If you do not press any key, the alarm and the light are on for 60 minutes (beginning with the preset

alarm time).

6.4.4 Snooze function

If you want to use the snooze function "Zz", you can activate it when setting the alarm (see chapter 6.4.1 "Setting the alarm") or you

can activate it later using the “ “ key. See chapter 6.4.5.

Briefly pressing the “

" key stops the alarm sound and activates the snooze function. "Zz" flashes in the display, and the preset

light intensity is maintained. The alarm is repeated after 10 minutes.

6.4.5 Activating and deactivating the alarm / snooze function

Press the " " key to activate the alarm. The alarm symbol or the alarm and " " symbol will appear on the display. To activate the

snooze function “Zz“, press the “ “ key again. The alarm symbol or the alarm and " " symbol and the symbol for the snooze

function “Zz“ will appear on the display.

Press the "

" key again to deactivate the alarm. The alarm symbol, the " " symbol and the symbol for the snooze function will

disappear from the display.

6.5 Radio

Press the " " key to switch the radio on and off. If required, unfold the antenna cable to improve radio reception.

Selecting and saving a radio station

In order to set a radio station (VHF), you must press the " " or " " key repeatedly until you have found the frequency of the desired

radio station. If you hold down the "

" or " " key for 3 seconds, station scanning is started. The radio stops at the next station that is

available. Hold down the "

" key for approx. 3 seconds to save the radio station; "MEM" flashes. Press the " " key or the " " key

to select the desired channel number "01" to "08". Press the "

" key to save the radio station under this channel number. With the

radio switched on, press the "TEST" key to select channel 1 to 8.

Frequency of the

radio station

Weekday

Time

Alarm time

Alarm symbol

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sempre 91644 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sempre 91644

Sempre 91644 User Manual - German - 12 pages

Sempre 91644 User Manual - French - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sempre 91644 Manual

Product: