528662

Sekonic L-478DR Manual

37
Zoom out
Zoom in
Previous page
1/72
Next page
37
5-2-4.
Cordless Multiple (Cumulative) Flash Mode
This Measuring mode is used when the light generated by the ash is inadequate
for proper exposure. The repeated ash pops can be accumulated until the desired
aperture is displayed.
The cumulative count is up to 99 times, and displayed in the Test/Title eld on the LCD
screen.
To activate this multi (cumulative) mode, set Cord Multiple (Cumu.) Flash mode ON in the
Custom Setting (See P55 for details).
In this measuring mode, the meter is set to measuring standby status (90 seconds) by
pressing the Measuring button
8
on the side of meter, and during this standby time
re the ash to take measurements. The measured value (f-stop) is displayed for each
trigger of the ash.
1. Touch the Measuring mode icon to open
the Measuring Mode Selection Screen, then
touch the
icon to select Cordless
Multiple (Cumulative) Flash Mode and return
the screen view to Measuring screen. (See
P25 for details.)
2. Set the ISO sensitivity value one the ISO
icon.
3. Set the shutter speed on the T (shutter
speed) icon.
*
Be sure the settings are within the
specications of the ash equipment.
4. Press the Measuring button
8
on the side of
meter.
The meter will be put into measuring standby
mode for 90 seconds and the measuring
mode icon
will blink, and the illumination of
LCD screen dims not to aect to the reading.
5. Trigger the ash unit manually while the
Measuring mode icon
is blinking.
The light will be measured and the measured
value (f-stop) is displayed.
*
If 90 seconds period is exceeded and the
icon stops blinking before the ash has been
triggered, press the Measuring button
8
again to return to ready to measure status.
6. Even after measurement, the
icon
continues blinking and the meter is in ready
to measure status.
7. Repeat this operation (pressing the
Measuring button
8
on the side of meter)
only for the number of times necessary.
The accumulated measured value (f-stop) and
the number of cumulative ashes are displayed.
8. To release (cancel) the measuring standby
status while the icon
is blinking for 90
seconds, touch the screen, or press either
the Memory button
5
or Menu button
7
.
Setting
values
Percentage
of ash
Measuring screen
(Cordless multi ash mode)
Measuring value (f-stop)
… 37 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-478dr

Reset search

  • Sekonic L478 DR
    The CH/ZONE setting is greyed out making it unavailable to set channel or zone. I have tried different settings in custom etc but not working. The unit it's new.
    Anyone know the answer? Submitted on 16-1-2022 at 06:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-478DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-478DR in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-478DR

Sekonic L-478DR User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info