528662

Sekonic L-478DR Manual

36
Zoom out
Zoom in
Previous page
1/72
Next page
36
5-2-3. Cord Multi (Cumulative) Flash Mode
This Measuring mode is used when the light
generated by the ash is inadequate for proper
exposure. Use a synchro cord (sold separately) and
connect the ash to the meter to re the ash. The
repeated ash pops can be accumulated until the
desired aperture is displayed.
The cumulative count is up to 99 times, and
displayed in the Test/Title eld on the LCD screen.
To activate this multi (cumulative) mode, set Cord
Multiple (Cumu.) Flash mode ON in the Custom Setting
(See P55 for details).
1. Connect the synchro cord (sold separately) to
the synchro terminal
13
of the meter.
2. Touch the Measuring mode icon to open
the Measuring Mode Selection Screen, then
touch the
icon to select Cord Multiple
(Cumulative) Flash Mode and return the
screen view to Measuring screen. (See P25
for details.)
3. Set ISO sensitivity value on ISO icon.
4. Set shutter speed on T (shutter speed) icon.
*
Be sure the settings are within the
specications of the ash equipment.
5. Press the Measuring button
8
on the side of
meter.
The ash will re and the measured value (f-stop)
will be displayed.
6. Repeat this operation (pressing the
Measuring button
8
on the side of meter)
only for the number of times necessary.
The accumulated measured value (f-stop)
and the number of cumulative ashes are
displayed.
,
•
e electronic ash unit may trigger when the meter or ash is turned ON or when the synchro cord is plugged into
the meter.
•
Triggering voltage is 2.0 to 300 volts. Below 2.0V, trigger the ash with Cordless Flash Mode. (See P35 for details) or
Radio Triggering Mode (See P41 for details).
•
When measuring a ash bulb, be sure to check the synchronization range and set the proper shutter speed.
Synchro terminal
13
Setting
values
Percentage
of ash
Measuring value (f-stop)
Measuring screen
(Cord multi ash Mode)
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-478dr

Reset search

  • Sekonic L478 DR
    The CH/ZONE setting is greyed out making it unavailable to set channel or zone. I have tried different settings in custom etc but not working. The unit it's new.
    Anyone know the answer? Submitted on 16-1-2022 at 06:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-478DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-478DR in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-478DR

Sekonic L-478DR User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info