528679
31
Zoom out
Zoom in
Previous page
1/36
Next page
examples to provide full control over movie scenes. It would not be erroneous to also apply
these to still photos.
Stage 1
Determine overall lighting strength.
a. Set meter to ISO 100 (see film
sensitivity intermediate values).
b. Set 24 red line of cine speed
scale to F/5.6.
c. At this time,
lower than 640 (footcandles). If this is taken as the meter scale position, a value of
500 footcandles (lower than 640 footcandles) becomes the required lighting strength
(see meter intermediate scale values).
mark indication on dial scale becomes slightly
Stage 2
Key light setting
a. Turn on key light (main light) and determine direction required for subject illumination.
b. Without installing slide, hold meter at the subject position, point Lumisphere toward
camera and set stopper button to released
position.
c. Adjust main light intensity or distance until meter indicates 400. The indication can
then be increased to the required 500 footcandles (determined in Stage 1c) by
applying fill in light.
Stage 3
Adjust illumination contrast
a. Install Lumidisc in place of Lumisphere.
b. Measure key light (indication should be 400 footcandles).
c. Turn on fill in light.
d. As described in section on outdoors Illumination Contrast
Adjustment, adjust fill in light to obtain suitable illumination
contrast. (For a contrast ratio of 2 : 1, the fill in light indication
must be 200 footcandles.) Lighting from back affects contrast
only slightly.
30
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-398M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-398M in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info