528679
29
Zoom out
Zoom in
Previous page
1/36
Next page
b. Hold meter about 15cm from the subject, point Lumigrid to each surface of the
subject and read the footcandle scale value.
c. To determine the luminance range, it is sufficient to divide the highest meter
indication by the lowest. For example, if the highest value is 80 and the lowest 5, the
luminance range becomes 80/5 = 16/1 or 16 : 1.
Luminance range measurement
3. To obtain superior color photographs, determine upper and lower limits.
a. Adequate color photographs can be obtained with typical color film if within the subject
luminance distribution, the maximum is less than 4 times the center point and minimum
more than 1 /4 times (i.e.: overall luminance range becomes less than 16 : 1).
b. With a luminance center point of 20, if the measured maximum luminance is higher
than 80 (center point 20 x 4 = 80), color of that surface will become faded in the
photograph. Consequently, a slight reduction of incident light to this portion becomes
required.
c. Conversely, a portion with a measured minimum luminance less than 5 (center point
20 / 4 = 5) requires increased illumination in order to obtain an acceptable color
photograph.
28
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-398M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-398M in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info