757413

Seiko 7B62 Manual

18
Zoom out
Zoom in
Previous page
1/21
Next page
Preliminary position
When the date and time are not correct even if the radio signal reception is successful, the preliminary position of the
date may be misaligned.
The possible causes of misalignment of preliminary position are as follows:
In the case of having a strong impact
:
the misalignment may occur when dropping or hitting the watch.
In the case of a magnetic influence
:
the misalignment may occur when bringing the watch close to an object which
generates magnetism.
“Examples of common magnetic products that may affect watches” → P.45
* The condition “the preliminary position of hand is misaligned” means that compared to a health meter, “the zero position of a
meter is misaligned, causing a correct weight not to be displayed.”
■Automatic hand position adjustment function (Adjustment of
preliminary positions of hour, minute and seconds hands)
The hour, minute, and seconds hands have an “automatic hand position adjustment function,” which automatically
corrects an incorrect preliminary position. Automatic hand position adjustment function activates at 12:00 both for the
AM and PM for the hour and minute hands and once a minute for the seconds hand.
* This function works when the preliminary hand position is misaligned due to external factors such as strong impact or magnetic
influence.
It does not work to adjust accuracy of the watch or slight deviations which may occur during the manufacturing process.
* The preliminary position of the hour and minute hands can also be manually adjusted.
“Set the preliminary position for the date, and the hour and minute hands.” → P.65
■ Preliminary position adjustment of the date
Since the preliminary position of the date is not automatically adjusted, it is necessary to align the position manually.
“Set the preliminary position for the date, and the hour and minute hands.” → P.65
EN 64
7
TROUBLESHOOTING
How to set the preliminary position
■ Set the preliminary position for the date, and the hour
and minute hands.
The preliminary position of the date is the “1st”.
The preliminary positions of the hour and minute hands are
“0:00 AM”.
When the preliminary positions are incorrect, the correct time and date cannot be displayed even if the
watch receives radio signals.
In such a case, by correcting the preliminary positions, the loss or gain of the time or date can be corrected.
When the numerical number of the date is not located at the center of the window, it can be corrected by
the same procedures as mentioned above.
To correct the preliminary positions, perform the operation on the next page.
EN 65
7
TROUBLESHOOTING
01 2
Pull out the
crown to the
second click
Press the
button once
and then
release it
1Pull the crown to the second click.
The seconds hand stops on the spot.
* When the crown is a screw lock type, unlock it.
→ P.13
* Do not turn the crown. Turning the crown switches the
watch to the manual time setting mode, and not the
preliminary position alignment mode. → P.59
2Press the button once, then release.
The watch switches to the preliminary position
alignment mode for the date.
The seconds hand moves to the 13-second
position.
The date moves, and stops at the preliminary
position.
* During movement of the date, neither the button nor
the crown can be operated.
EN 66
7
TROUBLESHOOTING
Turn clockwise to
advance 1 step.
Turn counterclockwise
to go back 1 step.
Press the
button
once
3Turn the crown to move the date to “1”.
Make sure that the numerical number “1” is located
at the center of the date window.
* If “1” is shown, go to step 4.
Continuous
adjustment
Turn quickly for continuous
movement.
Turn once more to stop.
Fine
adjustment
Turn intermittently to advance the
date slowly.
4If the correct date is not shown, press
the button once.
The watch switches to the preliminary position
alignment mode for the hour and minute hands.
The seconds hand moves, and stops at the 0-second
position.
The hour and minute hands move, and stop at the
12 o’clock position.
* While the hour and minute hands are moving, the
button and crown cannot be operated.
* If the correct time is shown, go to step 5.
EN 67
7
TROUBLESHOOTING
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 7B62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 7B62 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info