757413

Seiko 7B62 Manual

16
Zoom out
Zoom in
Previous page
1/21
Next page
How to conduct manual reception (Receive a radio
signal manually)
The antenna is embedded at the
9 o’clock position of the watch.
Turning the antenna toward the
outside of a window helps
improve radio signal reception.
Press and
hold for
3 seconds
1
Place the watch.
Place the watch where it can easily receive a radio signal.
“To improve radio signal reception” → P.23
“Environments in which it is difficult to receive a radio
signal” → P.24
*
The watch cannot receive a radio signal outside the radio
signal reception range. “Radio signal reception range
indication” → P.18
2Continue to press and hold the button for
3 seconds, and then release it when the
seconds hand moves to the 0-second position.
Reception starts after the seconds hand moves and stops
at the 0-second position.
*
When the time difference is set for a region other than radio
signal reception range, the seconds hand does not move to
the 0-second position. (A radio signal cannot be received
manually.) Check the time difference set currently.
“Setting the time difference (Setting the radio signal
transmitting station)” → P.29
EN 56
7
TROUBLESHOOTING
3
Place the watch and wait for a few minutes (max. 12 minutes).
When the seconds hand moves at the one-second interval, the reception is finished.
<Display until the reception is finished>
The seconds hand indicates the reception level. (Updated
every minute)
Reception level High : H Low : L
Display
Receiving state of
a radio signal Easy to receive Difficult to
receive
* In conjunction with the seconds hand movement, the minute
hand advances by one minute.
<If the reception has failed>
The seconds hand indicates the reception result “N.”
Reception result : N
After 5 seconds, the watch switches to the time display
mode.
“If reception has failed: The seconds hand points to N”
→ P.27
4
When the seconds hand starts to move at one-second intervals, check that the reception is successful.
When the reception is finished, check that the reception is successful.
“How to display the reception results” → P.26
* During movement of the date, neither the button nor the crown can be operated.
It takes time to receive a radio signal (max. 12 minutes).
* The required time varies depending on the receiving state of a
radio signal.
EN 57
7
TROUBLESHOOTING
When a radio signal cannot be received
When a radio signal cannot be received, refer to the following pages:
•Not receivable within the radio signal reception range
Check that the time difference of the area where the watch is used is set.
When the time and date are misaligned even after the time difference is correctly selected, refer to
Troubleshooting. “Reception of a radio signal” → P.71
Since a radio signal cannot be received, the time and date became misaligned. In this case, set the time
and date manually.
“How to manually set the time” → P.59
“How to manually set the date” → P.61
* For the radio signal reception ranges, refer to “Radio signal reception range indication” → P.18.
•When the watch is used outside the radio signal reception range
Select the time difference of the area where the watch is used.
“Setting the time difference (Setting the radio signal transmitting station)” → P.29
When the watch does not display the correct time and date even after setting the time difference, manually
set the time and date.
EN 58
7
TROUBLESHOOTING
■ How to manually set the time
If the watch is continually used in an environment in which a radio signal cannot be received (a region other than the
radio signal reception ranges, etc.), set the time manually.
“Radio signal reception range indication” → P.18
•
When the watch is used in an environment in which a radio signal can be received again, receive a radio signal to
set the time. “Automatic reception and manual reception” → P.17
•
When adjusting the time, the date will be accordingly adjusted.
* Even if a radio signal cannot be received, the watch can be used with the same accuracy as that of a normal quartz watch.
(Average gain/loss ±15 seconds per month)
* When the watch receives radio signals after the time is manually adjusted, it displays the time received from radio signals.
01 2
Pull out the
crown to the
second click
1
Pull the crown to the second click.
The seconds hand stops on the spot.
*
When the crown is a screw lock type, unlock it. → P.13
EN 59
7
TROUBLESHOOTING
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 7B62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 7B62 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info