606281
114
Zoom out
Zoom in
Previous page
1/148
Next page
112
Service Procedures (cont.)
Remove/Install the x2 SE Fenders and Fender Frames
Tools Required: 4 mm hex bit, torque wrench
To remove the x2 SE Fender and Frame assembly from the PT:
1. Make sure the Segway PT is unplugged and powered off.
2. Remove the three 28 mm fasteners using a 4 mm hex wrench (see
Figure 72).
3. Lift off the Fender and Frame assembly and clean all debris from
the mounting surfaces.
4. To remove the Fender from the Fender Frame, remove the four
18 mm fasteners using a 4 mm hex wrench (see Figure 73).
To install the x2 SE Fender and Frame assembly to the PT:
1. Thread the three 28mm long fasteners through the Fender and
Frame assembly into the gearbox cover.
2. Using a 4mm hex wrench, torque to 6.0N-m(4.4ft-lbf).
Fender and Fender Frame assembly
28 mm Fasteners
Figure 72: Remove/Install the x2 SE Fender/Fender Frame Assembly
Figure 73: Remove the Fender from the Fender Frame
Fender Frame Fender
18 mm Fasteners
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Segway x2 SE Turf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Segway x2 SE Turf in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info