606281
113
Zoom out
Zoom in
Previous page
1/148
Next page
111
Remove the x2 SE Tire/Wheel Assembly
Tools Required: 13 mm socket wrench
1. Make sure the Segway PT is unplugged and powered off.
2. Tip the PT on its side so the Wheel you want to remove is facing up,
and the bottom wheel rests against a smooth, clean surface.
3. Using a 13 mm socket wrench, remove the three wheel nuts and
discard (see Figure 71).
4. Remove the tire/wheel assembly.
Install the x2 SE Tire/Wheel Assembly
Tools Required: 13 mm socket, torque wrench
1. Make sure the Segway PT is unplugged and powered off.
2. Ensure the PT is on its side, and the gearbox flange is clean and free
of debris.
3. Place the Tire/Wheel assembly onto the gearbox flange (see
Figure 71).
4. Holding the wheel to prevent rotation, use a 13 mm socket wrench
to tighten the three wheel nuts included with the kit and torque to
30N-m(22ft-lbf).
Figure 71: Remove/Install the x2 SE Tire/Wheel Assembly
Wheel Nuts
Tire/Wheel Assembly
Gearbox Flange
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Segway x2 SE Turf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Segway x2 SE Turf in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info