491192

SEG Utah Manual

41
Zoom out
Zoom in
Previous page
1/111
Next page
9
Utah 81cm LED BLU-TV
EN
Connection and setup
Cable Installation
Please read the relevant content in „Notice for Maintenance and Safety“ carefully before the installation and use.
1. Take out the TV from the package and put it in a drafty and at place.
NOTE:
When you plug or unplug the TV, computer or other equipments, you must make sure that the AC power has been already
shut down; when unplugging the power cable or signal cable, please hold the plug (the insulated part), do not draw the
body of the cable.
2. The RF output terminal can be connected with the ANT1 (RF) input port of the TV or the satellite antenna / LNB
output terminal can be connected with the ANT2 (SATELLITE) input port of the TV.
3. The output AV terminal of DVD can be connected with the AV input port of the TV through AV cable.
4. Connect one end of the VGA cable with the VGA port on computer, connect the other end of the VGA cable with the
VGA port on the TV, and tighten the bolts clockwise on the each end of VGA cable. An audio connection between PC
and PC AUDIO Input must be given.
NOTE:
While connecting the 15-pin VGA, please do not insert the plug overexertedly, for fear the pin might be broken.
5. Connect one end of the HDMI cable with HDMI output port, connect the other end of the HDMI cable with the HDMI port on
the TV.
NOTE:
While connecting the HDMI, please aim at carefully, do not insert overexertedly, for fear the pin might be broken.
6. Check and make sure that all AV cables are connected with the corresponding ports correctly.
7. Connect SCART socket input or output from an external device to these jacks.
8. Connect the coaxial, digital audio input of a compatible device ( e.g. audio amplier) with the DIGITAL AUDIO OUT of
the TV.
9. Connect the AC power cable with 100-240V~ power supply.
NOTE:
The range of power input for the TV is 100-240V~ 50/60Hz, do not connect the TV power input port with the AC power out
of the above range.
Please hold the insulated part of the plug when you are unplugging the power cable, do not touch directly the metallic
part of the cable.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG Utah at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG Utah in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 17,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info