13
Be sure that everything is in normal condition and the freezer can be plugged in.
2. When operating for the first time
When operating is in normal condition and the freezer without any load until it
auto stops at the desired temperature, usually it takes 2 or 3 hours. Then set the
thermostat to the required setting and place foods in.
3. Temperature control
Freezer's temperature can be adjusted by turning the knob of the thermostat. The
closer to "MAX" position the knob is set, the lower the temperature becomes. A
medium setting is the most suitable for general operation. The position "MAX" is
cooler than the position "MID". Freezer's temperature will vary depending on the
quantity of foods stored and the frequency of the door opening, In order to
maintain good cooling efficiency and save energy, We recommend you not to
store too much foods and not to open the door too frequently.
CAUTION: When the thermostat has been turned clockwise to "MAX" position, do
not attempt to turn it more over. Otherwise it will be damaged.
4. Alternative hinging of door
The door is set to be hinged right at purchase; you can change it to left. To do this,
proceed as follows:
6
2
3
8
7
9
10
11
12
4
1
5
13
15
14
