788844
16
Zoom out
Zoom in
Previous page
1/16
Next page
8
6. When the appliance has finished charging, remove the mains adapter from
the wall socket and disconnect the USB-C charging cable from the appliance.
The hair straightener is now ready to use. Charging will take approx. 3-4 hours.
When the appliance’s battery is fully charged, you can use it for approx.
20 minutes at the highest temperature setting (220 °C).
During use, the charging indicator light will light up in ...
... white if the battery‘s capacity is above 60 %.
... orange if the battery‘s capacity is above 20 %.
The charging indicator light will flash if the battery’s capacity is below
20 %. This is to indicate that the battery needs recharging.
You can also insert the USB-C charging cable directly into the socket at
the bottom of the appliance if you want to charge the appliance without
using the charging station.
Information on the rechargeable battery
We recommend that you do not recharge the battery after each use.
To maintain the full charging capacity of the battery, only charge it if the
hair straightener has not been used for a longer period of time or if the
battery is almost flat. In such cases it should be recharged fully.
Even if the hair straightener is not used, its battery should be fully
discharged and then recharged 2 times a year.
Charge the battery at a temperature of between +10 °C and +40 °C.
The battery will best hold its charge at room temperature. The lower
the temperature, the shorter the battery life. Very high temperatures
can also negatively affect the battery's capacity.
9
Use
WARNING – risk of fire/burns
The appliance heats up very quickly. It reaches 80 °C within just 30 seconds.
Do not touch the heating plates during use.
The heating plates get very hot. During the heating phase and after use
(and until the plates have cooled sufficiently), either place the appliance
in the charging station or position it in such a way that the heating plates
are not touching any other objects. Ensure that any surface on which the
appliance is placed is heat-resistant.
Switching on the appliance and selecting the temperature setting
1. Slide the On/Off switch to ON.
2. To switch on the appliance, press and hold the Standby button for
approx. 3 seconds. The charging indicator light will light up in white or
orange (see chapter “Charging the battery”).
3. Press the Standby button again briefly to select the desired
temperature setting 160 °C, 180 °C, 200 or 220 °C.
The corresponding temperature indicator light will flash while the
appliance is heating up. As soon as the selected temperature has been
reached, the corresponding indicator light will glow continuously.
Time to heat up Temperature setting
approx. 2 minutes 160 °C
approx. 3 minutes 180 °C
approx. 3.5 minutes 200 °C
approx. 5 minutes 220 °C
117101 en Akku-Haarglaetter_v5.indd Druckbogen 8 von 8 - Seiten (8, 9)117101 en Akku-Haarglaetter_v5.indd Druckbogen 8 von 8 - Seiten (8, 9) 09.09.21 09:4709.09.21 09:47
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG HS 923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG HS 923 in the language / languages: English, German as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info