788844
15
Zoom out
Zoom in
Previous page
1/16
Next page
10
Keep the hair straightener in the charging station while
it is heating up. This way the heating plates remain pressed
together, preventing heat from escaping too quickly.
Otherwise, it will take a lot longer to reach the desired temperature.
Each time that the appliance is switched on, the temperature setting
of 200 °C is always selected by default.
To protect your hair, always start with the lowest temperature setting,
and increase the temperature only if needed. The lighter, thinner or more
sensitive the hair is, the lower the temperature should be to protect the hair.
This also applies for bleached or coloured hair. A higher temperature can
be selected for very thick, curly hair.
MTo switch the appliance to standby, press and hold the standby
button for approx. 3 seconds.
Straightening hair
WARNING – risk of fire/burns
The heating plates get very hot during use. Make sure that you keep
enough distance between the heating plates and your skin, ears and face.
Do not touch the heating plates. Only hold the appliance at the far end.
Only hold the hair straightener in the same position on the hair for
a short amount of time. Do not go over the same section of hair several
times in a row. Otherwise, you may damage your hair.
As your hair comes into contact with extremely high temperatures
when you are straightening it, keep the following in mind:
When choosing a shampoo or other hair care products, check that they
will moisturise your hair.
Before straightening, use a product that will protect your hair
against heat. Suitable products are available from your hairdresser
or from a health and beauty retailer.
7
Charging the battery
Before using the appliance for the first time, the battery must be fully
charged. The appliance cannot be switched on while charging.
DANGER – risk of fatal electric shock
Do not charge the appliance directly next to or over a washbasin filled with
water.













USB
1. Connect the USB-C charging cable
to the charging station and a USB
mains adapter (not included).
2. Plug the mains adapter into
a wall socket.
3. Ensure that the appliance is
switched off (the On/Off switch
is set to OFF).
4. Press the heating plates at the top
of the hair straightener together.
5. Insert the hair straightener into
the charging station as illustrated,
making sure to push it all the way
down.
The charging process will begin automatically.
During charging, the hair straightener’s charging indicator light will light
up in ...
... orange if the battery‘s capacity is below 90 %.
... white if the battery‘s capacity is above 90 %.
When the battery has fully charged, the charging indicator light will go out.
117101 en Akku-Haarglaetter_v5.indd Druckbogen 7 von 8 - Seiten (10, 7)117101 en Akku-Haarglaetter_v5.indd Druckbogen 7 von 8 - Seiten (10, 7) 09.09.21 09:4709.09.21 09:47
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG HS 923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG HS 923 in the language / languages: English, German as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info