676461
32
Zoom out
Zoom in
Previous page
1/58
Next page
24 Barracuda 5400.1 Product Manual, Rev. C
3.3.3 Ultra ATA/100 cable
An 80-conductor 40-pin cable is required to run Ultra DMA mode 3, mode 4
and mode 5. This cable uses even-numbered conductors connected to the
ground pins to improve signal integrity.
Figure 5. Ultra ATA cable connectors
Note. The drive supports both host and drive cable detection. The host
detects the 80-conductor cable by sampling pin 34, CBLID–, on the
interface bus. The drive detects the 80-conductor cable by sensing a
capacitor at the host side through the CBLID– signal. The result is
reported in a Fast Rise Detected bit (bit 13 of word 93 in the Identify
drive parameter block).
3.4 Drive mounting
You can mount the drive in any orientation using four screws in the side-
mounting holes or four screws in the bottom-mounting holes. See Figure 6 for
drive mounting dimensions. Follow these important mounting precautions
when mounting the drive:
Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire
perimeter of the drive for cooling.
Use only 6-32 UNC mounting screws.
Use only .045” +/- .005 high by .050” diameter bosses (4x) for bottom mounting
applications to prevent deformation of the SeaShield.
Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Do not use a drive interface cable that is more than 18 inches long.
Computer
Motherboard
Pin 1
aster
lave
Note. If you are using a 40-pin 80-conductor
cable, attach the blue connector to the
motherboard, the black connector to th
master drive, and the grey connector
to the slave.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seagate Barracuda 5400.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seagate Barracuda 5400.1 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info