664184
7
Zoom out
Zoom in
Previous page
1/8
Next page
12 scott-sports.com 13
VOLTAGE FRENGLISH
BIKE OWNER’S MANUAL
SET-UP OF OTHER SHOCK MODELS
IDS DROP OUT SYSTEM
SCOTT strongly recommends using only the originally specified shock with the
Voltage FR bike, as we have chosen carefully both parts for a perfect matching
combination.
If you want to use a different rear shock model than the one originally on the bike,
please make sure that the shock will not in any position hit the frame and cause a
damage to the frame.
Please follow the instruction below:
Please make sure that the rear shock or its accessory parts do not touch the frame
when mounting or suspending.
For doing so release the air/remove the coil, install the shock and compress the shock
completely.
If the shock touches the frame while doing so, do not use this shock in order to avoid
damage to frame, swingarm or shock
The Voltage FR offers the possibility not only to change drop out hanger in case of
damage, you also can choose between different several different drop outs
of the SCOTT IDS (Interchangeable Drop-Out System):
Inline you will find on Voltage FR 10/20 a 12mm through axle system,
on FR 30 a standard axle system.
In addition SCOTT offers following options:
- IDS 12mm short (10mm reduced wheelbase)
- IDS 12mm long (10mm prolonged wheelbase)
- IDS Maxle for SRAM Maxle System
Please contact your local SCOTT dealer for supply of those parts in case you want to
re-fit your bike with one of those versions.
FRONT FORK SET-UP/
CHANGE OF FRONT FORK
For the set up of the front fork please use the fork specific manual attached to the bike.
We recommend using front forks with distance of 525mm to 571mm between mid of
axle to top of crown, as this will not influence the geometry and alter handling of the
bike.
PIVOT MAINTENANCE
The pivots and bearings on SCOTT Voltage FR are extremely easy to maintain.
An external treatment with a grease spray after every bike wash is all you have to do.
We do not recommend heavy grease sprays since these will leave a film on the parts
which is difficult to remove. We recommend the same for the chain also.
If you have to change the bearings you can order them included in a service kit at your
local SCOTT dealer or buy them with international parts number as shown above in the
specs list in a hardware store.
In case of a change of the bearings or of the rear swingarm you should contact your
local SCOTT dealer as you need a special tool kit for disassembly and assembly.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Voltage Freeride - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Voltage Freeride - 2014 in the language / languages: English as an attachment in your email.

The manual is 5,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Voltage Freeride - 2014

Scott Voltage Freeride - 2014 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info