664184
6
Zoom out
Zoom in
Previous page
1/8
Next page
10 scott-sports.com 11
VOLTAGE FRENGLISH
BIKE OWNER’S MANUAL
SET-UP VOLTAGE FR BASIC SET-UP OF REBOUND
The Set-Up of the rear shock can be easy done within a few minutes.
Please take this time to avoid dangerous riding performance and to get the best out of
your Voltage FR.
Please make sure that the coil spring
on the shock matches to your riding
weight (including your riding gear).
We recommend following coil springs:
“Rebound” describes the speed the shock comes back to its original length after
absorbing an obstacle.
By using the red rebound screw you can adjust the rebound step by step.
Please refer to the following instruction:
Ride your bike off a pavement (remain in the saddle) and check how many times it
bounces.
- if it bounces 1-2 times, the set up is good.
- If it bounces more than 3 times the rebound is too fast.
Turn the screw 1-2 “clicks” clockwise
- If it does not bounce the rebound is too slow.
Turn the screw 1-2 “clicks” counter clockwise.
Important:
After a dismantlement of the rear shock, both fixing bolts should be tightened with
a tightening torque of 35Nm/308in-lbs.
If this is not done correctly the rear shock can be damaged.
Important!
Note that you have to mount the rear shock always as shown underneath.
Mounting the rear shock in a different position can cause severe damages to the frame,
the linkage levers and the rear shock.
Weight
(kg)
50 - 60
60 - 70
70 - 80
80 - 90
Recommended
coil springs
200 x 3.25
250 x 3.25
300 x 3.25
350 x 3.25
Shocklength
241mm
222mm
215mm
E2E with
40% SAG
211mm
194mm
189mm
For fine tuning the SAG and the corresponding eye-to-eye distance of the shock bolts
you can tighten or release the pretension of the coil spring but please respect the
maximum and minimum spring indications of the shock manufacturer.
The eye-to-eye distance between the shock bolts should be in basic set up with 40%
SAG. This length is also indicated on the cover of this manual by the colored beam of
the SAG-Boy.
For further details on the shock set-up please follow the indications of the rear shock
manufacturer attached to this bike.
The eye-to-eye distance between the
shock bolts should be in basic set up
with 40% SAG.
Shocklenght E2E
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Voltage Freeride - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Voltage Freeride - 2014 in the language / languages: English as an attachment in your email.

The manual is 5,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Voltage Freeride - 2014

Scott Voltage Freeride - 2014 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info