664164

Scott Toy Bike - 2016 Manual

22
Zoom out
Zoom in
Previous page
1/33
Next page
ENGLISHENGLISH
43 |
KIDS’ TOY BICYCLE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | KIDS’ TOY BICYCLE
| 42
b ca e fd
TRAINING WHEELS
Training wheels are designed to prevent the SCOTT toy bicycle from toppling
over, even when your child is yet unskilled (a). According to expert opinion,
training wheels are suitable to learn cycling to only a limited extent; often they
are even counterproductive. If these cycling aids are mounted, try to do without
as early as possible. Otherwise your child will get used to a completely wrong
riding technique. We recommend that you let your child practise with a tricycle,
a scooter or a walker. Experience has shown that if your child masters one of
these vehicles, getting familiar with the bicycle is less difficult.
The SCOTT toy bicycle of your child possibly includes training wheels. Start, if
necessary, by mounting the wheels to the arm. Loosen and remove the wheel
bolts completely at one side. Fasten the arm together with the support device
to the chainstay.
Make sure to properly mount the support device to the chainstay. Turn the
wheel nut without tightening it (b) and repeat the steps with the training wheel
on the other side. Both training wheels are then to be aligned in a way that with
the bike being in an upright position both wheels are in contact with the ground.
Finish by tightening the wheel nuts to the specified torque value.
DANGER!
G
If your child takes bends fast and rides over uneven ground, there is the
risk that he/she topples over with the SCOTT toy bicycle and the mounted
training wheels. Practise with your child how to handle the training wheels.
CAUTION!
A
Only buy training wheels that have been certified, for example according to
DIN/GS.
NOTE!
I
If you wish to install training wheels, ask your SCOTT dealer about suitable
models. Read the mounting instructions of the supplier and ask, if neces-
sary, your SCOTT dealer for further information.
NOTE!
I
The training wheels are only an unsatisfactory riding aid for very small chil-
dren and should be removed as soon as possible to train your child‘s sense
of balance.
Mounting the training wheels
Training wheel mounting (only for 12-inch and 16-inch models) and adjustment
of the chain tension on bicycles without derailleur gears. To mount the optional
training wheels for the 12-inch and 16-inch models proceed as described in the
following:
1. Release on one side of the rear wheel nut 1 and remove it including the wash-
er (c).
2. Assemble now the bolt and nuts/washers as shown below to fix the wheel on
part 2 (d).
3. Put part 3 in part 2 and fix it with nut 1 with the washer between nut 1 and
part 3 (e).
4. The long sleeved hole 4 (f) will help you to balance the bike when you assem-
bled on the other side of the bike the parts as mentioned above.
5. Both training wheels should be with a distance of 1-1.5cm to the ground when
the bike is balanced on its wheels. After balancing the bike please tighten the
wheel fixing nuts and the counter nuts.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Toy Bike - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Toy Bike - 2016 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Toy Bike - 2016

Scott Toy Bike - 2016 User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info