664181
11
Zoom out
Zoom in
Previous page
1/15
Next page
20
SPARK | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | SPARK
21
SPARK 2014
Tim, 21-Jan-13
User Manual: new points
FD-MOUNT Identification Spark 700 and 900
Spark 900 new FD
adaptor for MY14
Spark 700
NOTE:
Colours in pictures are not representitive of reality
New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch
CST when assembled.
New FD mounts for both Spark 700 and 900.
Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by
1mm to be the same as Shimano specs.
Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.
SPARK 2014
Tim, 21-Jan-13
User Manual: new points
FD-MOUNT Identification Spark 700 and 900
Spark 900 new FD
adaptor for MY14
Spark 700
NOTE:
Colours in pictures are not representitive of reality
New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch
CST when assembled.
New FD mounts for both Spark 700 and 900.
Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by
1mm to be the same as Shimano specs.
Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.
DEUTSCH
DEUTSCH
An Spark Bikes ausgestattet mit dem FOX Nude/FOX CTD Dämpfer können Sie die
Tretlagerhöhe über dem Boden in 2 Positionen einstellen durch das Umdrehen des
“Geometrie-Chips”, der sich an der Dämpferbefestigung der Umlenkwippe befindet.
Bitte verwenden Sie
ausschliesslich die
passenden Adapter, die
mit den Senkkopfbolzen
der Dämpfer
zusammenpassen.
1. Niedriges Tretlager: niedrigerer Schwerpunkt
2. Höheres Tretlager: grössere Bodenfreiheit der Pedale/Kurbeln
SPARK 700 SPARK 900
NIEDRIG
LENKWINKEL 68.3° 69.
TRETLAGERHÖHE 330mm 317mm
HOCH
LENKWINKEL 68.8° 70°
TRETLAGERHÖHE 336mm 323mm
EINSTELLBARE TRETLAGERHÖHE
WICHTIG!
Es ist nicht möglich den Geometrie-Chip mit anderen Dämpfermodellen als dem
FOX Nude/FOX CTD zu verwenden.
Der Dämpfer könnte mit der Umlenkwippe oder Rahmenteilen kollidieren.
Modelle die serienmässig mit einem anderen Dämpfer als dem FOX Nude /FOX CTD
ausgeliefert werden, haben einen Chip mit mittiger Bolzenbefestigungsbohrung.
Am Spark finden Sie einen
Shimano E-Type Umwerfer,
der jedoch direkt mit dem
Hinterbau verschraubt ist,
und nicht wie üblich mit einer
E-Type Platte zwischen der
Tretlagerpatrone und dem
Tretlagergehäuse geklemmt
ist oder aber einen SRAM
Direct Mount (DM) Umwerfer
vom Typ S3.
Bitte beachten sie, dass
Sie immer die dem Bike/
Rahmenset beiliegende
Adapterplatte zwischen der Umwerferplatte und der Kettenstrebe verbauen.
Diese Adapterplatte kann auch via die SCOTT Distribution mit folgender
Artikelnummer bestellt warden:
235276 FD mount plate Set Spark 700 2014
235278 FD mount plate Set Spark 900 2014
Die Umwerfer Adapterplatten von Spark 700 und 900 sind NICHT miteinander
kompatibel
BEFESTIGUNG DES VORDEREN UMWERFERS (FD)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Spark - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Spark - 2014 in the language / languages: German as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Spark - 2014

Scott Spark - 2014 User Manual - English - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info