664157
5
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISHENGLISH
BASIC SET-UP OF FORKS
Recommended tools for the shock setup:
- The SAG tool that came with your bike. *Fox forks only
- A shock pump with a special air valve connector (not supplied with this bike), this will
help stop air from escaping while removing the pump from the shock valve.
Please note that air will flow into the hose and indicator when counterchecking the air
pressure, this will give the appearance that the shock has less air pressure than it was setup,
your shock may need to be adjusted once this action is made.
Please also note that the indicators of shock pumps have a tolerance of max. 10%.
For bikes spec’d with Fox forks:
You can find more specific information about Fox set
up on Fox’s website, please use your fork ID number
to find more useful setup tips for your exact fork
(visit: ridefox.com)
SAG
Your SCOTT bike will be supplied with a SAG tool to help set up your bikes suspension, these
SAG tools can be easily clipped on the fork body and Fork dust seal.
For the best performance it is recommended you start with SAG of 15-20% for forks.
1. Make sure before any adjustment is made that your forks are in the “open” position.
2. With the fork pump attached to the fork valve, pump your desired pressure into the fork.
Once the pressure is achieved slowly compress and decompress your fork through 25% of
its travel 10 times. This will equalize the positive and negative air chambers and will change
the pressure on the pump gauge, if needed add or reduce pressure and repeat.
Note the compression/decompression of the fork through the travel must also be done
if the pressure is reduced!
3. Once your desired pressure is reached slide the rubber O-ring on the fork leg against the
dust seal, clip on your SAG tool if required.
4. Sit on your bike in your usual riding position (in your riding gear: if you carry a bag/
Hydration-system put it on,) don’t “bounce” the suspension while doing this, use a wall or
a friend for support if needed.
5. Get off the bike gently without bouncing and check the O-ring position on the fork
stanchion, with the SAG adjuster clipped on. This makes it easy to see where your SAG is
set. Example below.
IMPORTANT!
Do not sit on your bike with the shock pump
attached to the bike!
09 |
BIKE USER MANUAL | SCALESCALE | BIKE USER MANUAL
| 08
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Scale - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Scale - 2016 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Scale - 2016

Scott Scale - 2016 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info