779956
22
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISHENGLISH 43 |
ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE
| 42
14
2
3
What to bear in mind with aero bars on SCOTT triathlon bikes and
SCOTT time trial machines
In triathlon sport and time trial, where a particularly aerodynamic seating posi-
tion is important, so-called aero bars (e) are commonly used. With these aero
models the shifters are often positioned at the handlebar ends, the brake levers
at the ends of bull-horn handlebars.
When you ride with your back in a horizontal position, the brake levers are out
of reach and the reaction time is longer, which makes your stopping distance
longer. For this reason it is very important to anticipate problems when riding.
Within certain limits the position of the handlebars can be adjusted according
to your personal preferences. That means that the straight part of the aero bars
should point downwards or upwards to an only minor degree. The basic handle-
bars should be parallel to the ground or point slightly upwards. Make sure your
forearms are always comfortably rested, i.e. your elbows should project beyond
the armrests a little towards the rear (f). Bring the armrests in a position which
allow you to breathe freely.
DANGER!
G
Note that the distance you need to stop your bike increases, while riding
with the hands on the top handlebars or in aerodynamic position. The brake
levers are not always within easy reach.
CAUTION!
A
SCOTT triathlon bikes and SCOTT time trial machines have specific riding
characteristics. Make yourself familiar with your new SCOTT triathlon bike
or with your new SCOTT time trial machine in an unfrequented area and ap-
proach the riding characteristics step by step.
Adjustment of handlebar tilt and brake lever/shifter units on SCOTT
road bikes and SCOTT cyclo-cross bikes
The straight extensions below the drops should be parallel to the ground or
point slightly downwards towards the rear (a). The grips of the brake lever/shift-
er units are horizontal or point slightly upwards. The ends of the brake lever/
shifter units should meet an imaginary extension of the bottom line of the drops.
Shifting the brake levers/shifters is a job best left to your SCOTT dealer, as it
involves retaping the handlebars afterwards.
To adjust the tilt of the handlebars, release the Allen bolt(s) on the underside or
front side of the stem. Turn the handlebars to the desired position. Make sure
the handlebars are accurately centred in the stem.
Carefully retighten the bolt(s) with the torque wrench. Make sure the upper and
lower clamping slots of the stem are parallel and identical in width (b). If you
have a stem with several bolts, tighten them evenly in a cross pattern (c) by
using a torque wrench and observe the recommended torque values.
Check by trying to rotate the handlebars relative to the stem and tighten the
bolt a little more, if necessary (d).
Use a torque wrench and do not exceed the maximum torque values given in
the chapter “Recommended torque settings for your SCOTT bike” or in the
manuals of the component manufacturers on this SCOTT info CD. If you disre-
gard the prescribed values, the components may come loose or break. This can
lead to a severe crash.
b ca e fd
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Road Bikes 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Road Bikes 2018 in the language / languages: English as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Road Bikes 2018

Scott Road Bikes 2018 User Manual - German - 65 pages

Scott Road Bikes 2018 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info