779956
21
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISHENGLISH 41 |
ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE
| 40
In the case of SRAM start by setting the cam disc on the slightly pulled and
inward moved shifters. Screw in the screw positioned behind the hood in the
body by using an Allen key.
In the case of flat bars there is a small adjusting bolt where the brake hose of a
side-pull brake runs into the brake lever unit or on the lever itself.
Check the proper adjustment and functioning of the brake system subsequent-
ly, as described in the chapter “Brakes” and/or in the manuals of the brake
manufacturer on this SCOTT info CD.
If you have problems reaching the levers, please contact your SCOTT dealer.
DANGER!
G
Make sure you cannot pull the brake levers all the way to the handlebars (e).
Your maximum braking force must be reached short of this point!
DANGER!
G
Note that the bolted connections of the stem, handlebars and brakes have
to be tightened to the specified torques (f). You will find the respective
values in the chapter “Recommended torque settings for your SCOTT bike” or
in the manuals of the component manufacturers on this SCOTT info CD. If you
disregard the prescribed values, the components may come loose or break. This
can lead to a severe crash.
NOTE!
I
In the case of hydraulic brakes and disc brakes follow the manual of the
brake manufacturer, which you can find on this SCOTT info CD. If you are in
doubt or if you have any questions, contact your SCOTT dealer.
NOTE!
I
Some manufacturers offer brake levers/shifters which are suitable for small
hands. If you have any problems with the brake lever reach, contact your
SCOTT dealer.
Position the saddle so that its upper surface is parallel to the ground. Tighten
the bolt gradually and make sure
1) the clamping device is still accurately mounted on the carbon seat post head
and
2) the clamp is tightening evenly around each rail.
Once there is uniform hold on both rails, tighten the bolt gradually with a torque
wrench (a) until you have reached the maximum torque value indicated in New-
ton metres (Nm) on the seat post.
DANGER!
G
Check the bolts by using a torque wrench once a month according to the
values indicated directly on the components and/or in the manuals of the
component manufacturers on this SCOTT info CD.
DANGER!
G
Poorly tightened or loosening bolts can fail. Risk of accident!
COCKPIT ADJUSTMENT
Brake lever reach adjustment on SCOTT road bikes and SCOTT cyclo-
cross bikes
With road bikes the clearance between brake lever/shifter and handlebar can be
adjusted to a minor degree. This gives riders with small hands the convenience
of bringing the brake levers closer to the handlebars.
The first phalanx respectively of the index and the middle finger must reach
around the brake lever (b). Braking from the top with your hands on the upper
end of the brake grips is not an alternative in the long run and in hazardous situ-
ations, you need more manual force and cannot support yourself appropriately.
In the case of Shimano’s Dura-Ace unscrew the chrome cover and tighten the
screw positioned in the front (c). In the case of the Ultegra you need special
insert pieces (d). In the case of both Di2 models you reach the screws from the
rear, after you have removed the hoods.
b ca e fd
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Road Bikes 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Road Bikes 2018 in the language / languages: English as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Road Bikes 2018

Scott Road Bikes 2018 User Manual - German - 65 pages

Scott Road Bikes 2018 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info