780001
5
Zoom out
Zoom in
Previous page
1/13
Next page
08 PLASMA 5 | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | PLASMA 5 09
ENGLISH
ENGLISH
CABLE ROUTING: FOR ELECTRONIC SHIFTING
Front Derailleur (FD) & Rear Derailleur (RD) wires:
Route the COMMAND electric wire (approx. 1000mm) down from the headtube long
hole to the bottom bracket right hand housing.
Route the FD wire (approx. 200mm) down from the frame front derailleur exit hole
to the bottom bracket right hand housing.
Route the RD wire (approx. 500mm) down from the frame right dropout exit hole to
the bottom bracket right hand housing.
Route the BATTERY wire (approx. 600mm) down the seattube to the bottom
bracket right hand housing.
Plug all wires to the junction box SM-JC41, insert the box into the frame through
the bottom bracket right hand housing and make sure all wires will not disturb the
bottom bracket assembly.
Rear Brake (RB) Cable Housing:
IMPORTANT
To avoid any damage to the frame structure put a housing end plug at the end of
the housing.
Place the housing into the headtube long hole, push the housing until it touches
the rear end of the headtube (you may feel a resistance), orient the housing
up and push the housing again, it will then follow the headtube down and
continue its travel along the downtube, continue running the cable housing into
the frame.
Once the housing is visible from the bottom bracket opening, lead the housing to the
bottom bracket exit hole on the underside of the downtube in front of the bottom
bracket.
Pull the housing to leave approx. 100mm of cable housing outside the frame.
Front Brake (FB) Cable Housing:
refer to the Stem/Handlebar section.
Handlebar Command wiring:
route the wires into the Stem/Handlebar as described into the Stem/Handlebar
section.
Route the FD COMMAND & RD COMMAND wires through the headtube cap part (905).
Route the COMMAND wire through the headtube cap part (905), connect the wires
to the junction box SM-EW90-A, assemble the headtube cap part (905) as described
into the Headset/Stem body section and zip-tie the junction box SM-EW90-A to either
stem body or storage box.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Plasma 5 - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Plasma 5 - 2019 in the language / languages: English as an attachment in your email.

The manual is 3.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Plasma 5 - 2019

Scott Plasma 5 - 2019 User Manual - German - 13 pages

Scott Plasma 5 - 2019 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info