779959
6
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISHENGLISH
WHEELS
Bicycle wheels are designed to be removable for easier transportation and for
repair of a tire puncture. In most cases, the wheel axles are inserted into slots, called
“dropouts” in the fork and frame, but some suspension mountain bikes use what is
called a “through axle” wheel mounting system.
If you have a mountain bike equipped with through axle front or rear wheels, make
sure that your dealer has given you the manufacturer’s instructions, and follow
those when installing or removing a through axle wheel. If you don’t know what a
through axle is, ask your dealer.
Hex nuts or hex key bolts which are
threaded on to or into the hub axle
(bolton wheel, fig. 10)
Your bicycle may be equipped with a different securing method for the front wheel
than for the rear wheel. Discuss the wheel securing method for your bicycle with
your dealer.
It is very important that you understand the type of wheel securing method on
your bicycle, that you know how to secure the wheels correctly, and that you know
how to apply the correct clamping force that safely secures the wheel. Ask your
dealer to instruct you in correct wheel removal and installation, and ask him to
give you any available manufacturers instructions.
FRONT WHEEL SECONDARY RETENTION DEVICES
Most bicycles have front forks which utilize a secondary wheel retention device
to keep the wheel from disengaging if the quick release is incorrectly adjusted.
Secondary retention devices are not a substitute for correct quick release
adjustment. Secondary retention devices fall into two basic categories:
1. The clipon type is a part which the manufacturer adds to the front wheel hub or
front fork.
2. The integral type is molded, cast or machined into the outer faces of the front fork
dropouts.
Ask your dealer to explain the particular secondary retention device on your bike.
WARNING!
Do not remove or disable the secondary retention device. As its name implies, it
serves as a back‑up for a critical adjustment. If the quick release is not adjusted
correctly, the secondary retention device can reduce the risk of the wheel
disengaging from the fork. Removing or disabling the secondary retention device
may also void the warranty.
Failure to properly adjust the quick release mechanism can cause the wheel to
wobble or disengage, which could cause you to loose control and fall, resulting in
serious injury or death.
FIXING A FLAT TIRE
Bike tires are fitted with tubes.
Remove the wheel from the bike and deflate it. Unhook the tire from one side of the
rim using tire tools. Do not screwdrivers.
Remove the tube from the tire casing, repair or replace it. Install the new or repaired
tire. Fill the tube lightly with air in order to let it take its shape. Put the valve stem
through the hole, and fit the inside tire. Put the tire bead in the rim starting at the
valve and finishing at the opposite end, working on both sides. Push the valve stem
into the tire and pull it back down to seat. Make sure the tube is not pinched under
the tire bead. Inflate with hand or foot‑pump.
Close the brake’s quick release system carefully.
USE OF A BICYCLE HAULER
SCOTT bikes are not intended to be used with haulers (loadhaulers, kids‑haulers,
Trailer bikes).
Please note that SCOTT will not take any warranty or responsibility when using
a hauler.
There are too many different haulers and hauler fixation systems on the market
to give a detailed table of systems that might fit without technical problems or
endangering the passengers.
11 |
BIKE USER MANUAL | BMXBMX | BIKE USER MANUAL
| 10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott BMX 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott BMX 2018 in the language / languages: English as an attachment in your email.

The manual is 0.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott BMX 2018

Scott BMX 2018 User Manual - German - 10 pages

Scott BMX 2018 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info