671384

Schwinn 102 Upright Bike Manual

15
Zoom out
Zoom in
Previous page
1/29
Next page
13
OPERATION
Setting Goals:
Once you select an exercise program, you can set “goals” for TIME, DISTANCE, or CALORIES. For
example, if you set a CALORIE goal of 100, once you start the program, you will notice that the
CALORIE display will count down from 100 to 0. If you do not want to set a goal in any of the above,
simply press ENTER to advance to the next goal choice or press START / STOP to begin exercising.
When the TIME, DISTANCE, or CALORIES display is flashing, enter values by using the UP or DOWN
button to select a value then press ENTER to confirm the value and advance to the next goal choice.
When a goal is reached during your exercise, the corresponding display will flash, signaling that your
workout is complete.
We recommend that you only set one goal (TIME, DISTANCE, or CALORIES) for each exercise. Note,
if no goals are set and the goal displays are 0, the TIME, DISTANCE, and CALORIES values will count
up once the START / STOP button is pressed and you begin exercising.
Quick Start:
If you want to immediately start exercising without choosing any specific program or inputting any
goals, simply press the START / STOP button after the computer powers up to begin exercising in the
Manual mode.
Resistance control:
In the MANUAL program you can adjust the level of resistance at any time by using the UP or DOWN
buttons to select from level 1 to level 8. In the preset profile programs you can also adjust the level of
resistance, but you can not lower the resistance below the minimum preset resistance. For example if
the minimum preset level of resistance in one interval of the preset profile program is level 2, you are
not able to manually lower the resistance to level 1. However, you can raise and lower the resistance
between the lower and upper presets.
Exercising with preset TIME:
The workouts are segmented into 16 intervals. If you preset the TIME, each segment of your workout
is 1/16 of the total TIME you entered. For example if you enter a workout TIME of 16 minutes, each
segment (interval) is 1 minute in duration. The TIME counts down from the preset TIME you entered
until the program reaches 0, the display flashes, and the program ends.
Exercising without preset TIME:
If you choose not to preset TIME you can enter a preset DISTANCE. To do this make sure that the
TIME is set to 0:00 and press ENTER when the TIME display is flashing to advance to DISTANCE.
When setting a preset DISTANCE each segment (interval) counts down in units of .01 until the
program reaches 0, the display flashes, and the program ends. If you choose not to enter a preset
distance the program advances (counts up) in increments of .01 until you choose to stop exercising.
To advance to set a CALORIE goal do not preset a TIME or a DISTANCE goal (make sure those values
are set to 0). Just press ENTER when those displays flash. This will bring you to the CALORIE goal.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 102 Upright Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 102 Upright Bike in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info