671384
14
Zoom out
Zoom in
Previous page
1/29
Next page
OPERATION
12
Computer Buttons::
UP To make upward adjustments to function data, to increase the level of resistance, or to
select user setting.
DOWN To make backward adjustments to function data, to decrease the level of resistance, or
to select user setting.
ENTER To confirm function or data setting.
RECOVERY To activate the heart rate recovery function.
RESET To clear and reset the computer.
START/STOP To start or stop exercising.
Operating Overview: (after the computer powers up)
USERS Press the UP or DOWN buttons to select U1 (User number 1) to U4 (User number
4) as your user identification number. The computer is set up to store goal data
for 4 different users. Remember which number you want to exercise under so
you can return to it. Any goals you set will be stored under your user number.
PROGRAMS Use the UP or DOWN buttons to select the training mode. There is 1 Manual
program, 6 preset profile programs, 3 Heart Rate Control programs (55%, 75%,
and 90%) and 1 Target Heart Rate program. If you select any of the Heart Rate
programs you will need to input your age.
RESISTANCE Use the UP or DOWN buttons to adjust the resistance level from Level 1 (easiest)
to Level 8 (more difficult). Use this button when exercising in the Manual
program, the 6 preset profile programs, and the User mode. The resistance level
is automatically adjusted according to your heart rate when exercising in the Heart
Rate programs.
EXERCISE DATA Use the UP or DOWN buttons to set up the exercise function data. When you set
the data for each function press the ENTER button to confirm the settings.
General Operating Information:
Getting started:
Press any button on the console or begin pedaling to turn on the computer. The computer will store
the user goal data of 4 different users. This will allow goals to be set by a specific user. They will
remain the default goals for that user’s next exercise session. To select the desired user: When the
computer powers up, press the RESET button so it will prompt you to select user U1 through U4.
Use the UP or DOWN button to select the user. Press the ENTER button to confirm. The program
bar will flash in the upper left corner of the display. Use the UP or DOWN button to scroll through the
programs. After selecting a program, press ENTER to confirm. Press ENTER until you see the TIME
display flash. This is the signal that you can now begin to set goals if you desire. If you do not desire
to set any goals simply press START / STOP to begin exercising.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 102 Upright Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 102 Upright Bike in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info