Manual Scholtes pmg 41 dcdr (page 15 of 72) (English, German, Dutch, French, Italian, Spanish)

335556

Zoom out

Zoom in

1/72

Fig.1

Fig.2

365

495

Fig.3b

Fig.3a

N.B.: to make maintenance operations more efficient,

the area around the hob must be easily accessible

after it has been installed (i.e. there are no

completely shut-off elements).

N.B.: An insulating wooden panel should be fitted

beneath the hob, positioned at a minimum of 20 mm

from the hob underside. This wooden panel must be

removable in order to allow for any maintenance

operations beneath the hob.

Fixing to the unit

For fixing the hobs proceed as follows:

• Brackets "S" for fixing hobs to the cabinet have

been provided, and these should be fitted as shown

in fig.3b.

• Before fitting the hob to the worktop, position the

seal provided "T" along the perimeter of the hob, as

illustrated in figure 3a.

• The dimensions of the cutout for the appliance

must be those indicated in the figure 2.

Installation

Make sure you take all the necessary precautions to

guarantee proper installation in compliance with the

applicable norms in force regarding accident-

prevention for electrical connection. For the correct

operation of the appliance when built into the

cabinet, it is vital that the minimum distances

illustrated in Fig. 1 be respected. The hob features a

type Y degree of protection against overheating in

compliance with norms. All surfaces adjacent to the

cabinet and the back panel should be made of

materials resistant to a temperature of 65°C.

50 min

700 min

50 min

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes pmg 41 dcdr in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes pmg 41 dcdr Manual

Product: