740664
36
Zoom out
Zoom in
Previous page
1/53
Next page
36
3. Regularly cleaning and maintenance grants proper operation and
optimal performance of your appliance.
4. Check your utensils if they are suitable for use in a microwave
appliance.
5. The air vents of the appliance or its built-in structure (if the
appliance is suitable for being built-in) must be completely open,
unblocked and free of any kind of dirt.
6. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!
SAVE THESE INSTRUCTIONS.
The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
1. Remove all packaging materials. If a safety film is on the appliance, pull it off
carefully. Check that the appliance is not damaged. If you detect any damage,
please contact the shop you purchased the appliance at.
2. Install the appliance in a dry and corrosion-safe place. Keep the appliance away
from sources of heat and moisture such as gas burners, water containers etc.
3. Always observe the required minimum distances for proper ventilation (s.
below).
MINIMUM DISTANCES REQUIRED FOR PROPER VENTILATION:
Back ↔ wall
min. 10 cm
Left/right ↔ other object/wall
min. 5 cm
Free space above the appliance
min. 20 cm
4. The distance to the ground should be min. 85 cm.
5. The back of the appliance must be aligned towards a wall.
6. Install the appliance more than 5 m away from TV-sets, radios and antennas to
avoid interferences.
7. The plug must always be accessible after installation. Only use a proper
grounded safety socket for connection.
8. Operate the appliance with its door closed only.
9. Manufacturing residues or oil having remained in the oven cavity or on the
heating element may cause some odours and smoke emission. These are normal
operational parameters, which will disappear after a number of uses. Open the
room door or a window to ensure proper ventilation. We strongly recommend
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schneider MW 823G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schneider MW 823G in the language / languages: English, German as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info