781987

Scheppach WOX Z 700SL Manual

33
Zoom out
Zoom in
Previous page
1/48
Next page
Seite:33
Intended use m
• The firewood circular saw and the supplied tool is exclusively constructed for the processing of wood.
• The machine complies with the valid EG Machines regulation
• The machine has only been constructed for one-shift operation. Duty cycle S 6 - 40%.
• The saw is exclusively constructed for transverse cutting of firewood of max. 1 m length.
• Independent of the wood diameter only one piece may be laid onto the rocker.
• Take notice of all safety and risk information of the machine.
• Keep all safety and risk information of the machine completely in readable condition.
• Upon usage in closed rooms the machine should be connected to an exhaust installation.
• Use the machine only in technical impeccable condition as well as according to its intended use, and in a safety -
and danger conscious manner with observance of the operational constructions! Immediately eliminate, or have
eliminated, in particular those disorders that can harm safety!
• The safety, work and maintenance regulations of the producer as well as the measurments mentioned in the
“Technical information“ must be abided by.
• Attention must be paid to the applicable prevention of accidents rules and to the other, generally accepted safety-
related rules.
• The machine should only be used, maintained or repaired by people who are familiar with it and informed about the
risks. Arbitrary changes to the machine exclude liability of the manufacturer.
• The machine should only be used with original accessories, original extension tools and original saw blades of the
manufacturer.
• Every use surpassing this counts as non-intended use. In this case the manufacturer is not liable for damages
caused; therefore the user only bears the consequences.
Other risks m
The machine is built according to the up to date technical level and the accepted safety-related rules. However, some
remaining risks might occur during work.
•Risk of injury for fingers and hands by the rotating saw blade in case of incorrect usage of the workpiece.
•Risk of health because of wood dust or wood splinters. Wear personal protection gear such as eye protection and dusk
mask without fail.
• Risk of health because of noise. During operation the allowable noise level is exceeded.
•Electricity danger, in case electrical connections not according to the rules are used.
•Furthermore, despite of all precautions unapparent remaining risks can exist.
•Remaining risks can be minimized, when the “Safety information” and the ”Intended use” as well as the operational
instructions altogether are respected.
Attention: risk of accident!
The wood must always be seated on both sides of the saw blade on the v-block of the rocker. (see arrows)
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach WOX Z 700SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WOX Z 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 4.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info