781987
31
Zoom out
Zoom in
Previous page
1/48
Next page
Seite:31
General instructions m
•After unpacking please check all parts for possible damage during transport. In case of complaints the driver needs to
be contacted as soon as possible.
•Complaints coming in later will not be recognized as such.
•Check if the consignment is complete.
•Familiarize yourself with the machine by means of the operating instructions before implementing it.
•In case of replacing worn or exchange parts, as for accessories, only use original Scheppach parts. You can obtain
exchange parts at the specialized dealer.
•Upon ordering, please specify our article nºs as well as type and year of construction of the tool.
Safety instructions m
• In these operation instructions we have indicated positions that concern your safety, with this mark.
Training of the operator m
Forward the safety instructions to all people working on or with this machine.
The minimum age for the operating person is 18 years. Trainees should be minimum 16 years of age, but are
only allowed to work with the machine under supervision.
People running the machine should not be distracted.
Keep children away from the to the net connected machine.
Do not wear tight clothing. Take off jewelry, rings and wristwatches.
Be careful at work: Danger of damaging finger(s) and hand(s) by the rotating cutting tool.
Take notice of all safety and danger information of the machine and keep them readable.
Steadfastness
Please be vigilant the machine is steadfast while being assembled.
Power supply line of the machine
• Check power supply lines. Do not use defective lines. See “Electrical connection“.
• Pay attention to the motor and tool rolling direction. See „Electrical connection“.
• Installations, repairs and maintenance installations to the electrical installation should only be carried out by experi-
enced staff.
• To repair disorders switch off the machine. Pull out the power plug.
• Upon leaving the work site switch of the motor. Pull out the power plug.
• Also at the slightest movement of the machine disconnect it from any external power supply! To restart orderly recon-
nect the machine to the power supply!
Setting-up and adjusting of the machine
Setting-up, modifying, measuring as well as cleaning to be carried out only when motor is switched off. Pull out
power plug and wait for stagnation of the rotating tool.
All protection and safety facilities have to be assembled again directly after repair and maintenance works have
finished.
Use only well sharpened, slit free and non-deformed saw blades.
Scope of delivery
Rocker circular saw
Female six fold wrench or open-end wrench
Locking pin
Operational instructions
190510904 / 190510905
Seesaw extension
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach WOX Z 700SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WOX Z 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 4.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info