781864
21
Zoom out
Zoom in
Previous page
1/48
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58 www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
21GB
Work information
Cutting height Spar max. mm 240
min. mm 60
Turning cut max. mm 250
Piece of wood max. mm 370 x 240
Reserve technical changes!
Specic noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2
from EN 31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts
under the foundations of ISO 7904 supplement a performed working conditions to.
Sound pressure level in dB
Idle LWA / Processing LWA 95 / 102
Sound pressure level on working site in dB
Idle LqAeq / Processing LqAeq 85 / 92
The specied values are emission values and therefore should not at the same time be reliable working site values.
Although there is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions
need to be taken or not. Factors, which inuence the actual availabe immusion value on working site, include the peculi-
arities of working area, other sources of noise, e.g. the number of machines and other adjoining processes. The allowed
working values could vary from country to country. However, the information should qualify the user, to be able to make
an estimation of the dangers and risks.
7. Scope of delivery
Rocker circular saw
Allen key or open-end wrench
Locking pin
Operating instructions
8. Assembly
The machine is supplied completely assembled them, and is therefore ready to use.
9. Setting-up and adjustment
Please pay attention that your rocker circular saw is set up stable and on a leveled oor.
The workplace must be well lit.
There should be no obstacles to the machine.
10. Transport of the machine
1
Rocker lock / transport
1. To transport the swivel log saw, latch the swivel lock in posi-
tion (1).
2. Insert the transport handle (3) through 2 loops and, for safety,
slightly turn it, and lift and transport it using the transport handle.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Wox D 700SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Wox D 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 3.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info