782107

Scheppach WL05 Woodster Manual

24
Zoom out
Zoom in
Previous page
1/52
Next page
24
stalled immediately upon completion of any repair or
maintenance work.
Clean and lightly oil the spindle thread of the tool •
holder when changing tools.
When possible, the tail stock sleeve should be removed •
by unscrewing it, cleaned and then sprayed with a dry
lubricant. Grease the threaded spindle.
Check the eccentric clamp of the tailstock as well as •
the tool holder and adjust if necessary. In addition,
tighten the hex nut under the bracket.
Check the drive belt and replace when necessary.•
Accessories
Article Art. No.
Screw chuck 7400 7200
Socket chuck Ø 30 mm 7400 8600
Socket chuck Ø 40 mm 7400 7300
Socket chuck Ø 60 mm 7400 8700
Driver plate Ø 80 mm 7400 8800
Three-jaw chuck Ø 100 mm 7400 8900
Four-jaw chuck Ø 125 mm 7400 7400
Drill chuck 3 – 16 mm cone mandrel MK-2 7400 7700
EC Declaration of Conformity
We herewith declare, Woodster GmbH, Günzburger Str. 69, D-89335
Ichenhausen that the machine described below due to its con struc-
tion and design and in the version delivered by us complies with the
relevant provisions of the following EC Directives.
In case of a modification of the machine this declara tion ceases to
be valid.
Machine description:
Wood Turner Lathe
Machine type:
wl 05, Art. No. 390 2301 908, 390 2301 911
Relevant EC directives:
EC machine directive 2006/42/EG,
EC Low voltage directive 2006/95/EWG,
EC-EMV directive 2004/108/EWG.
Applied harmonized European standards
EN 12100-1, EN 12100-2, EN 13857, EN 55014, EN 50082-1, EN
60555-2, EN 60 204-1
Notified body within the meaning of Annex VII
TÜV Rheinland, Product Safety GmbH, 51101 Köln
Engaged for:
EG-Baumusterbescheinigung 5002 1766
Place, date:
Ichenhausen, 29.06.2009
Signature:
On behalf of Thomas Honigmann (Managing director)
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach WL05 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WL05 Woodster in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info