Manual Scheppach WL05 Woodster (page 16 of 52) (English, German, Dutch, French, Italian)

782107

Zoom out

Zoom in

1/52

Close the casing and lock into place by turning the •

screw of a revolution to the right.

When the cover is closed, read the adjusted speed from •

the viewing-window.

When working with highly unbalanced workpieces, se-•

lect a speed at least one level lower.

Driver, Fig. 1.2

The driver (A) is used exclusively for work between both

centers.

Face plate, ﬁgure 1

The face plate is used with ﬂat larger tools.

Change of the clamping tools

Loosen grub screw on the shaft of the clamping tool.•

Retain spindle with mandrel, release the clamping tool •

with the hexagonal spanner.

Tailstock, Fig. 1, 6

Once the eccentric clamp has been loosened, the tail-•

stock can be moved over the entire length of the bed

and can be secured at any distance from the head-

stock.

To insert a workpiece between the centers, loosen the •

binder, turn the sleeve approx. 20 mm outward and

clamp.

Slide the tailstock to the workpiece and place the tail-•

stock center into the sunken point in the center of the

workpiece.

Screw out the tailstock sleeve until the tailstock center •

Fig. 1.2

456

Fig. 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WL05 Woodster in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach WL05 Woodster Manual

Product: