782107
14
Zoom out
Zoom in
Previous page
1/52
Next page
14
Even when all safety measures are taken, some re-•
maining hazards which are not yet evident may still
be present.
Remaining hazards can be minimized by following the •
instructions in „Safety Precautions“, „Proper Use“ and
in the entire operating manual.
Start-up
Observe the safety notes in the operating instructions before
operating the machine.
Remove the tensioning spindle or the chuck from the spindle
in addition to any step-up tools before first operating the
machine!
SPEED ADJUSTMENT
The speed can only be adjusted once the machine has
been unplugged.
The correct number of revolutions is visible on the speed
diagram located on the headstock. The speed diagram is
intended for medium-hard dry woods.
The appropriate speed is based on various factors such
as:
type and compostion of woods•
seasoned, dry woods•
diameter and length of workpieces•
squared or unbalanced woods•
width of pre-worked, balanced workpieces•
wood turner tools and technique•
workpieces out of glued wood•
Successful wood turning does not result from high
speeds, but rather, from correct use of the machine.
Guidelines for speed adjustment
Low speeds for:
workpieces with large diameters•
hard workpieces with large diameters•
long, unbalanced workpieces•
glued pieces of wood•
Speed adjustment (Fig. 2+3)
Open casing by rotating the lock screw of a revolution •
to the left.
Loosen the binder (C). To turn further, pull in the direc-•
tion indicated by the arrow. The binder can be moved
freely up or down.
Using the lever, raise the electric motor and move the •
belt to the desired level. The belt must lie exactly in
the grooves of the belt disc.
Lower the electric motor into place and tighten the belt •
by applying light pressure to the lever (2). Tighten the
binder (C) and return to its vertical position.
NOTE: Extremely high belt-tension causes rapid wear of
the belt.
Fig. 2 A
B
Fig. 3
2
C
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach WL05 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach WL05 Woodster in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info