782130

Scheppach UG700 Manual

11
Zoom out
Zoom in
Previous page
1/48
Next page
international 11
• Check the proper function of the machine before each
use.
• Do not use below temperatures of -0¡C. Risk of damage
to the casing.
• Switch the motor off when leaving the working area.
Disconnect the mains plug.
• Before relocating the machine, even over short dis-
tances, disconnect it from all external power sources!
Reconnect the machine properly to the mains supply
before putting it to operation again!
m Intended Use
This machine complies with the current EC machinery direc-
tive.
• The machine was designed according to the state of
the art and safety standards. Nevertheless, the use of
it might pose a hazard to health or life of the operator
or others, or might have adverse effects on the machine
or other material assets.
• Use the machine only in good technical condition, in
accordance with the intended use, bearing in mind the
safety and possible dangers, and in adherence to the
operating instructions. In particular, faults that might
cause an unsafe condition must be repaired immedi-
ately!
• Using the machine to remove wood dust and wood shav-
ings in industrial areas is not permitted.
• Regularly inspect the filter for damage. Replace dam-
aged filters! Check tightness of the casing and of the
sealing of filter and shavings bag regularly.
• When you use the cleaning nozzle make sure you do
not suck in objects such as screws, nails, or pieces of
plastic or wood.
• The machine may only be used with original parts and
original accessories from the manufacturer.
• Using the machine to remove wood dust and wood shav-
ings in industrial areas is not permitted. This directive
only applies in Germany.
• Every other use will be considered unintended use. The
manufacturer assumes no liability for damage arising
from this and it will be solely at the operator‘s own
risk.
• The manufacture‘s safety, working, and maintenance
instructions, as well as the dimensions stated in the
technical specifications, must be observed.
• The applicable accident prevention regulations and
other generally accepted rules concerning safety must
be obeyed.
• The machine may only be operated, serviced, or re-
paired by persons familiar with it and aware of the
risks. Arbitrary modifications of the machine exclude
any liability of the manufacturer for damage arising from
this.
• The machine may only be used with original accessories
from the manufacturer.
m Remaining hazards
The machine was designed according to the state of the art
and accepted safety standards. However, remaining risks
might occur during work.
utilisation.
• N’utilisez pas l’appareil quand il r gne des températures
de -0 C°. Le boîtier pourrait tre endommagé.
• Éteignez le moteur et retirez la fiche secteur quand vous
quittez le lieu de travail.
• Coupez tout apport d’énergie extérieur mème pour
le moindre déplacement de la machine. Connectez la
machine au secteur de fa on réglementaire avant toute
réutilisation!
m Utilisation conforme
La machine répond à la directive sur les machines de la CE
en vigueur.
• La machine a été construite selon les r gles technique et
de sécurité. Il est malgré tout possible, que l’utilisation
de la machine représente un danger corporel ou mortel
pour l’utilisateur ou pour un tiers. Il est possible que
la machine elle-m me ou d’autres valeurs matérielles
soient endommagées.
• N’utilisez la machine que si elle est dans un parfait état
technique. Utilisez-la de fa on conforme aux normes de
sécurité, étant conscient des dangers et en observant
le mode d’emploi. (Faites) réparer dans les plus bref
délais tout dysfonctionnement, spécialement ceux pou-
vant nuire à la sécurité.
• L’aspiration de la poussi re de bois et des copeaux n’est
pas autorisée dans un milieu industriel.
• Contr ôlez réguli rement si le filtre n’est pas endomma-
gé. Échangez les filtres endommagés! Contr ôlez réguli
rement l’étanchéité du boîtier et les joints du filtre et
du sac collecteur de copeaux.
• Pendant l’utilisation de la buse de nettoyage, veillez à
ne pas aspirer de corps étrangers tels que des vis, des
clous, des morceaux de plastique ou de bois.
• La machine doit tre utilisée uniquement avec des pi ces
et des accessoires originaux du fabricant.
• L’aspiration de la poussi re de bois et des copeaux n’est
pas autorisée dans un milieu industriel. Cette indication
est valable uniquement en Allemagne.
• Toute autre utilisation est considérée comme non
conforme aux prescriptions. Le fabricant ne peut tre
tenu responsable de dommages résultant d’une telle
utilisation, ce risque est enti rement à la charge de
l’utilisateur.
• Les consignes de sécurité, de travail et d’entretien du
fabricant, ainsi que les dimensions indiquées dans les
caractéristiques techniques sont à respecter.
• Les consignes de prévention des accidents correspon-
dantes ainsi que les consignes d’ordre générale tou-
chant à la sécurité doivent tre respectées.
La machine ne peut tre utilisée, entretenue ou réparée
que par des personnes connaissant son fonctionnement
et étant informées des dangers. Des modifications non
autorisées de la machine excluent la responsabilité du
fabricant concernant les dommages pouvant en décou-
ler.
• La machine doit tre utilisée uniquement avec des ac-
cessoires originaux du fabricant.
m Risques résiduels
La machine a été construite selon l’état de la technique et
les règles technique, de sécurité reconnues. Malgré tout
des risques résiduels peuvent survenir pendant le travail.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach UG700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach UG700 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info