782536

Scheppach TS2800 Primaster Manual

24
Zoom out
Zoom in
Previous page
1/48
Next page
24 І 48
6 Do not overload your electric tool
–They work better and more safely in the specied
output range.
7 Use the correct electric tool
–Do not use low-output electric tools for heavy work.
–Do not use the electric tool for purposes for which
it is not intended. For example, do not use hand-
held circular saws for the cutting of branches or
logs.
–Do not use the electric tool to cut rewood.
8 Wear suitable clothing
–Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
–When working outdoors, anti-slip footwear is rec-
ommended.
–Tie long hair back in a hair net.
9 Use protective equipment
–Wear protective goggles.
–Wear a mask when carrying out dust-creating
work.
10 Connect the dust extraction device if you will be
processing wood, materials similar to wood, or
plastics.
–If connections for dust extraction and a collect-
ing device are present, make sure that they are
connected and used properly.
–When processing wood, materials similar to
wood, and plastics. operation in enclosed spaces
is only permitted with the use of a suitable extrac-
tion system.
11 Secure the workpiece
–Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held more
securely than with your hand.
–An additional support is necessary for long work-
pieces (table, trestle, etc.) in order to prevent the
machine from tipping over.
–Always press the workpiece rmly against the
working plate and stop in order to prevent bounc-
ing and twisting of the workpiece.
12 Avoid abnormal posture
–Make sure that you have secure footing and al-
ways maintain your balance.
–Avoid awkward hand positions in which a sudden
slip could cause one or both hands to come into
contact with the saw blade.
13 Take care of your tools
–Keep cutting tools sharp and clean in order to be
able to work better and more safely.
–Follow the instructions for lubrication and for tool
replacement.
–Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
–Check extension cables regularly and replace
them when damaged.
–Keep the handle dry, clean and free of oil and
grease.
14 Pull the plug out of the outlet
–Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is still
impossible to eliminate certain residual risk factors.
The following hazards may arise in connection with
the machine’s construction and design:
• Contact with the saw blade in the uncovered saw
zone.
• Reaching into the running saw blade (cut injuries).
• Kick-back of workpieces and parts of workpieces
• Saw blade fracturing.
• Catapulting of faulty carbide tips from the saw
blade.
• Damage to hearing if essential ear-muffs are not
worn.
• Harmful emissions of wood dust when the machine
is used in closed rooms.
m Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications. Our warranty will be voided if the machine
is used in commercial, trade or industrial businesses
or for equivalent purposes.
5. General safety information
Attention! The following basic safety measures must
be observed when using electric tools for protection
against electric shock, and the risk of injury and re.
Read all these notices before using the electric tool
and keep the safety instructions for later reference.
Safe work
1 Keep the work area orderly
–Disorder in the work area can lead to accidents.
2 Take environmental inuences into account
–Do not expose electric tools to rain.
–Do not use electric tools in a damp or wet envi-
ronment.
–Make sure that the work area is well-illuminated.
–Do not use electric tools where there is a risk of
re or explosion.
3 Protect yourself from electric shock
–Avoid physical contact with earthed parts (e.g.
pipes, radiators, electric ranges, cooling units).
4 Keep children away
–Do not allow other persons to touch the equipment
or cable, keep them away from your work area.
5 Securely store unused electric tools
–Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of
children.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach TS2800 Primaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach TS2800 Primaster in the language / languages: English, German, French as an attachment in your email.

The manual is 6.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info