782524
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Trouble-shooting
Problem Possible cause Solution
1. Saw blade comes
loose after the motor is
turned off.
Mounting nut has not been tightened enough. Tighten the mounting nut (right-hand thread).
2. Motor does not start. a) Failure mains fuse a) Check the mains fuse.
b) Extension lead faulty b) Replace the extension lead.
c) Connections on motor or switch not ok c) Have an electrician check them.
d) Motor or switch faulty d) Have an electrician check them.
3. Motor has wrong
direction of rotation
a) Capacitor faulty a) Have an electrician check it.
b) Incorrect connection b) Have an electrician change the polarity of
the wall socket.
4. Motor does not have
any power, fuse is
tripped
a) Cross section of the extension lead not
sufficient
a) See Electric connection.
b) Overload due to blunt saw blade b) Replace the saw blade.
5. Burnt area on the
cutting surface
a) Blunt saw blade a) Sharpen the saw blade, replace it.
b) Wrong saw blade b) Replace the saw blade.
Storing the saw blade keys, fig. 16
The keys for saw blade replacement can be stored with
the power tool.
NOTE: Using this operating manual, check the power tool
for possible wear and tear and damage when you are
using it again.
TRANSPORT
1 Before any transport, turn the power tool off and dis-
connect it from the power supply.
2 At least two people should carry the power tool and
do not lift it by the table extension.
3 To use the transport device, put the power tool on its
side, fold up both frames and secure them by tighte-
ning the wing nut. Continue as described in Step 3.
4 Protect the power tool from blows, impact and strong
vibrations, e.g. during transport in vehicles.
5 Secure the power tool against tilting and sliding.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach TS251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach TS251 in the language / languages: English, German, French as an attachment in your email.

The manual is 5.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info