Manual Scheppach TKG 210-30 (page 13 of 26) (English, German)

782518

Zoom out

Zoom in

1/26

Safety Notes

have the machine repaired before using it again. Do not attempt to repair it yourself. Have the

machine repaired by a qualified professional or turn to the Westfalia Customer Support.

 Do not reach unto the working area to remove pieces or for any other reason while the

machine is running and the saw assembly is not locked into the resting position.

 Make sure the machine is, if possible, solidly mounted or clamped to a workbench or table.

 Long work pieces should by all means be supported with an additional support such as a

roller support.

 Make sure there are no nails, screws or similar items in the work piece.

Special Safety Notes for Bench Saws:

 Check the saw blade before every use. Do not use a damaged or cracked saw blade.

Immediately replace it with a new saw blade which conforms to the European Norm

EN 847-1. The saw blade must also be in accordance with the data given in the technical

data section of this manual.

 Saw blades made from high alloyed high speed steel (HSS Steel) must not be used with this

machine.

 Do not leave the bench saw if the saw blade has come to a complete stop.

 Make sure all parts are securely mounted and have proper function. Especially make sure

the blade guard (H) is freely movable. Under no circumstances the blade guard should be

jammed upright.

 Do not reach into the cutting area of the saw blade when the bench saw is running.

 If the table insert becomes damaged, it must be replaced.

 Wear protective gloves when handling the saw blade and coarse materials. Please

keep in mind that wearing Gloves while operating the saw is a safety risk and

should not be done.

 Wear hearing protection.

 Saw dust from some species of wood can be hazardous. Therefore, wear a dust

mask.

 Always use some kind of dust bag when working with wood. Ideally, use a dust

extractor.

 Long workpieces should be supported at the ends. A roller support is most suitable for this.

 First allow the saw blade to come to working speed and than bring the workpiece close to the

saw blade. Thereby you will avoid a kickback.

 Make sure the cutting area is free from workpieces and adjusting tools. Small workpieces or

wrenches can get be thrown away from the rotating saw blade and cause injuries.

 Only cut one workpiece at a time.

 Do not touch the saw blade after operation. The saw blade might become very hot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach TKG 210-30 in the language / languages: English, German as an attachment in your email.

The manual is 0.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach TKG 210-30 Manual

Product: